How to Connect Brother Printer to Laptop
The
Wireless Setup Installer
is the recommended setup method for users connecting using a wireless computer. If you’re not using a wireless figurer or you have previously set up your Brother device but take lost connection, you may still use the Wireless Setup Installer, or y’all may use an
Culling Wireless Setup Method.
For Macintosh Users, refer to:
Connect your machine to a wireless network – Macintosh
– Clickhither
for video instructions.
1. Insert the Blood brother CD into your computer or download and run the Full Driver and Software Bundle
fromhttps://support.brother.com
. Clickhere
for download instructions.
If the Brother screen does not appear automatically, go to
(My) Computer
and double-click the Brother CD icon.
2. Select your language/country and and so click
Next.
3.
On
the License Understanding, place a cheque next to
I accept this license understanding
and and then click
Side by side
i
f you
hold to the terms.
four. Choose
Wireless Network Connectedness (Wi-Fi), and and then click
Side by side.
– If yous receive a “No machine constitute” bulletin, click
Wireless Setup
and then become to:
Configure using the figurer’s wireless connection or without using a USB cable.
5. Cull one of the post-obit setup methods:
If your Blood brother motorcar is already connected to your network, you volition non demand to choose a setup method. The computer must already be connected to the aforementioned network. Go to
pace half dozen
.
Configure using the computer’southward wireless connectedness or without using a USB cablevision
a.
The installer will detect the network that your computer is continued to and report the SSID (Network Name). Choose
Aye, I want to connect the automobile to this wireless network
and then click
Next.
If this is not the network that you lot want to connect to, cull
No, I want to connect the motorcar to another wireless network
and then click
Next
. Follow the steps to connect to a dissimilar network. You volition need to ensure that your computer is besides connected to the same network as your Brother machine.
b.
Go to
footstep 6.
If the connection failed and then bicycle the power on the router for about 15 seconds and then retry the wireless setup once again.
If this configuration consistently fails, nosotros recommend that youreset the Brother machine’south network carte
and manually configure the wireless settings on your machine. Refer to:
Culling Wireless Setup Methods
for additional configuration methods.
Configure using a temporary USB cablevision connectedness
a.
Choose
Yes, I take a USB cable to use for the installation
and and so click
Next
.
b. Gatheryour wireless network SSID/network proper name and network fundamental/password. Identify a check in the
Checked and confirmed
box and click
Side by side.
c.
When prompted, temporarily connect the USB cable (not included) directly to your estimator and your Brother machine. Make sure your Brother machine is powered on. Click
Next
.
This step may take a few minutes for the USB driver to exist installed. You may meet
Installing Device Driver
in the job tray (bottom right corner of the screen).
d.
Select the Brother automobile and click
Next.
If the machine isn’t listed:
–
Make sure the Brother machine is turned on.
–
Disconnect and and then reconnect the USB cable from the calculator and machine.
–
Make sure the cablevision isn’t continued to your Brother machine’southward Ethernet port.
–
Try another USB port on the estimator and another
USB cable.
–
Click
Refresh
to search for the machine once again.
e.
The list of available wireless networks is displayed, choose your network name and then click
Next
.
If the list is blank, bank check that the router is turned on, dissemination the network proper name, and that it’s within range for wireless communication. You may need to wheel the ability to the router for about fifteen seconds to reestablish communication and then click
Refresh
.
If your access point is gear up to non circulate the SSID you can manually add it past clicking the
Advanced
button. Enter the network Name (SSID), which is case sensitive, click
Next
. Select the authentication and encryption. Enter the network key if necessary and click
Next
.
f. Enter the
Network Central
and then click
Next
.
g.
On the Wireless Network Settings Confirmation screen, click
Adjacent
. The settings will be sent to the machine.
If the connexion failed then wheel the power on the router for nearly 15 seconds so click
Retry. If this configuration consistently fails, we recommend that youreset the Brother automobile’due south network card
and manually configure the wireless settings on your machine. Refer to:
Alternative Wireless Setup Methods
for additional configuration methods.
F
or Advanced Users: If you desire to manually enter the IP address settings on your machine, click
Modify IP Address
and enter the necessary IP address settings for your network.
h. When prompted, disconnect the USB cable from your computer and your automobile. The wireless setup is now complete. G
o to
step 6.
If “No machine found” is displayed, check the following:
The computer cannot communicate with your motorcar. This could exist caused by a firewall, security plan, or the calculator or Brother car is not properly connected to the network.
a. Cycle the power on the admission point or router for 15 seconds.
b.
Look 1 minute.
The Blood brother car needs time to connect to your network and receive an IP address.
c. Click
Refresh
to search the network again.
d. If the Brother motorcar is nonetheless not found on the network, you lot can either ready upward the machine on the network once over again (refer to:
Culling Wireless Setup Methods
for boosted configuration methods) or get to the following steps to endeavour adding the printer driver using the IP address:
i. Print the
Network Configuration report
to obtain the auto’due south IP Address.
ii. Click
Enter IP Accost.
iii. Enter the IP Address of the machine from the Network Configuration study and then click
Search.
four. The auto should now be found, go back to
step 6. If the car is still not plant,
reset the Brother auto’due south network menuand set up the machine on the network once more. Refer to:
Alternative Wireless Setup Methods
for additional configuration methods
vii. Choose
Standard (Recommended)
and and then click
Next. The installation volition take a few moments.
If you want to install the PostScript commuter, choose
Custom
. Select
PS Commuter
and then click
Adjacent.
If a Windows Security screen appears, click the bank check box and click
Install.
8. If your computer has an Net connection, the Brother iPrint&Scan will begin to download and install. You may click
Install Afterward
to install the software from “Brother Utilities” at a later time.
9. When the “Boosted Software” screen appears, you may cull to install any available software. click
Next
when finished.
PaperPort is required for OCR scanning.
ten. When the “Boosted Options” screen appears, choose any desired options. Click
Next
to go along
.
xi. Choose any desired onscreen options. When washed, click
Finish.
12.
If a “Bank check for Software Updates” screen appears, click
Update.
Internet access is required.
Alternative Wireless Setup Methods
|
|
|
|
|
Windows Users Macintosh Users Mobile Device Users |
Manually enter your network’s security settings directly into the machine using the Control Panel.
You’ll be required to know your
|
|
|
Mobile Device Users |
Yous can configure a secured wireless network betwixt your machine and a mobile device, such equally an Android device, Windows Telephone device, iPhone, iPod touch on, or iPad, without using a router.
* To print or scan using your mobile device, download the free |
