UnBrick.ID Flashing Firmware Database
Hg531 V1 300mbps Wireless Adsl2+ Router Firmware
HG531 V1 300Mbps Wireless ADSL2+ Router
User Guide
i
Contents
1 Product Overview
i
Supported Features
ii
Ports and Buttons
three Indicators
2 Hardware Installation
v
Selecting an Installation Location
v
Connecting Cables
6
Powering On
3 Setting Network Parameters
6
Setting the Estimator IP Accost
7
Logging In to the Web Management Page
vii
Setting Dial-Up Connection Parameters
4 Wireless Connection Setup
10
Enabling and Disabling the WLAN on the HG531 V1
10
Setting Up a Wireless Connexion Using the WPS Button
10
Manually Setting Up a Wireless Connexion
12
Changing Your WLAN Name and Password
5 Maintenance Guide
12
Changing the Web Management Page User Name and Password
12
Restoring Default Settings
6 FAQs
14
What Can I Do If I Cannot Open the Web Management Page?
14
What Tin I Do If the HG531 V1 Cannot Access the Internet through a Wireless Network
Adapter Sometimes or If the WLAN Connection Is Unsteady?
14
What Can I Do If I Cannot Access the Internet?
16
I Often Need to Restart the HG531 V1 to Display Web Pages. What Can I Practise?
7 Appendix
17
Technical Specifications
18
Default Settings
one
1
Product Overview
Supported Features
The HG531 V1 300Mbps Wireless ADSL2+ Router (HG531 V1 for brusque) is a high-speed wireless router
designed for dwelling and small office use. This chapter describes the features supported by the HG531 V1.
•
Digital subscriber line (DSL) provides rugged stability, and with the WPS button, zero configuration is
required for connections to multiple devices.
•
Network range allows any device in a home to exist connected with a manual rate of up to
300Mbps
.
•
A powerful firewall is provided with a flexible network configuration and quality of service (QoS)
strategy, enabling different home devices to enjoy hullogh-speed and high-quality broadband services.
High-Bandwidth
DSL Connectivity
The HG531 V1 incorporates a loftier-performance ADSL2+ processor and provides high-speed Cyberspace
access and abundant services to be delivered
through the digital subscriber line (DSL).
Routing
The HG531 V1 supports routing. It can obtain
an IP address through PPP dial-up or Dynamic Host
Configuration Protocol (DHCP), which provides simultaneous admission for multiple devices.
WLAN
The HG531 V1 supports multiple WLAN protocols, including 802.11b/chiliad/due north (two.4 GHz). Adopting 802.11n
multiple-input
multiple-output
antennas (MIMO) technology, the HG531 V1 delivers a wireless
transmission rate of up to 300Mbps with its dual antennas.
In addition,
the HG531 V1 supports multiple
wireless encryption modes to provide a secure, reliable, and high-speed WLAN.
Wi-Fi Protected Setup
You lot can gear up wireless connections between the HG531 V1 and Wi-Fi enabled devices by pressing the
Wi-Fi Protected Setup (WPS)
button.
Firewall
The powerful built-in firewall effectively protects against 6ruses and malicious attacks.
ARP Assault Protection
You can package an IP accost and MAC address bi-directionally, which effectively protects your LAN
from Address Resolution Protocol
(ARP) attacks.
Easy Configuration and Management
The HG531 V1 provides password-protected web-based
management pages to protect your personal information.
2
Ports and Buttons
No.
Item
Description
iReset
Restores the HG531 V1 to its default settings after yous press and
concur this button for 6 seconds or more than while the HG531 V1 is
powered on.
A reset will result in all custom data and settings existence lost. Use
with caution.
2On/Off
Powers the HG531 V1 on or off.
3Power
Connects to a ability
adapter.
4LAN4~LAN1
Connects to Ethernet devices, such as computers, gear up-top boxes
(STBs), and switches.
fiveADSL
Connects to a DSL filter or phone socket.
6WLAN/WPS
•
Enables or disables
the WLAN function.
Press this button (more than 3 seconds) to
enable the WLAN
office.
•
Starts Wi-Fi protected setup (WPS) negotiation.
Printing this button (less than three seconds) to outset WPS negotiation.
1
two
34five
WLAN/
6
WPS
3
Indicators
Indicator
Statu.s.a.
Description
Ability
Steady green
The HG531 V1 is powered on.
Off
The HG531 V1 is powered off.
ADSL
Blinking green
A DSL connection is being activated.
Steady green
A digital subscriber line (DSL) connection has been set
up and activated.
Off
No DSL connexion has been gear up up, or the
DSL
connection is faulty.
The HG531 V1 is powered off.
Internet
Blinking green
The HG531 V1 is connected to
the Net in router
mode, and information idue south beingness transmitted.
Steady greenish
The HG531 V1 is connected to
the Internet in router
style, but no data is existence transmitted.
Off
•
The
HG531 V1
is in router mode,
but not continued to the
Internet.
•
The
HG531 V1
is in bridge way.
The HG531 V1 is powered off.
4
WLAN
Blinking green
The HG531 V1 has WLAN
enabled, and data is existence
transmitted.
Steady green
The HG531 V1 has WLAN enabled, but is not
transmitting data.
Off
WLAN is disabled.
The HG531 V1 is powered off.
WPS
Blinking green
The HG531 Fivei is connected to a wireless client, such as
a computer with a wireless network adapter, over the
WLAN using the Wi-Fi
Protected Setup (WPS)
office.
The WPS indicator blinks for 120 seconds or
less.
Steady light-green
The HG531 V1 is attemptinthou to connect to a wireless
client over the WLAN using the WPS function.
The WPS indicator is steady on for 300 seconds,
and
then turns off.
Off
WPS is disabled.
The HG531 V1 is powered off.
LAN1~LAN4
Blinking green
The LAN port is connected to an Ethernet device with a
network cablevision, and data is being transmitted.
Steady green
The LAN port is connected to an Ethernet device (such
every bit a computer) with a network cablevision, but no data is
being transmitted.
Off
The LAN port is not continued to any Ethernet device.
The HG531 V1 is powered off.
five
2
Hardware Installation
Selecting an Installation Location
Identify the HG531 V1 on a well-ventilated even surface without exposure to directly sunlight. For the best
possible performance, accept note of the following:
•
Make sure in that location are no obstacles, such as concrete or wooden
walls, between the figurer and
HG531 V1
.
•
Ensure that the computer and
HG531 V1
are far from electric appliances that generate strong magnetic or
electric fields, such as
microwave ovens.
Connecting Cables
If you have subscribed to digital subscriber line
(DSL) broadband, you tin can connect the HG531 V1 to a
telephone port for Internet access.
Follow the steps in theastward post-obit effigy to connect devices properly.
1 Telephone wall jack
ii Splitter
3 Telephone
iv Desktop computer
v Power adapter
vi Set-top Box
vii Laptop estimator
8 Smart Phone
9 Pad
a LINE port
b MODEM port
c PHONE port
MODEM
Telephone
LINE
i
two3
iv
v
six
7
8
ix
a
b
c
half dozen
When configuring the HG531 V1 for the showtime
time, use an Ethernet
cable to connect the
HG531 V1
to a reckoner.
Powering On
To ability on the HG531 V1, press its power button.
Subsequently the HG531 V1 is powered on, the HG531 V1 indicator
turns on. If the indicators do not acquit as
expected, ensure that everything is plugged in correctly.
3
Setting Network Parameters
Setting the Calculator IP Address
Before logging in to the HG531 V1 web direction page, gear up the IP address of the computer that will
be used for the login.
On Windows 7
i.
Choose
Start
>
Command Panel
>
Network
and Internet
>
Network
and Sharing Center
.
2.
Cull
Alter adapter settingsouth
. Right-click
Local Expanse Connection
and choose
Properties
.
3.
Double-click
Cyberspace Protocol Version 4 (TCP/IPv4)
.
iv.
Select
Obtain an IP accost automatically
and
Obtain DNS server address automatically
. Click
OK
.
On Windows Vista
ane.
Choose
Outset
>
Control Panel
>
Network
and Internet
>
Network
and Sharing Center
.
2.
Choose
Manage network connections
. Right-click the connection that you desire to alter, and then click
Properties
.
3.
Double-click
Net Protocol Version 4 (TCP/IPv4)
.
four.
Select
Obtain an IP address automatically
and
Obtain DNS server address automatically
. Click
OK
.
On Windows eight
i.
Choose
Settings
>
Control Panel
>
Network and Internet
>
Network and Sharing Center
.
2.
Choose
Change adapter settings
. Right-click the connection that you desire to change, so click
Properties
.
3.
Select
Internet Protocol Version 4 (TCIP/IPv4)
, and click
Backdrop
.
iv.
Select
Obtain an IP address automatically
and
Obtain DNS server address automatically
. Click
OK
.
seven
On MAC Bone X
one.
Choose
Arrangement Preferences
>
Network
>
Advanced
.
two.
Click
AirPort
, and choose
Avant-garde
in the lower right corner.
3.
Click
TCP/IP
tab.
iv.
Select
Automatically
in
Configure IPviv
, and click
OK
.
v.
Click
Utilise
.
Logging In to the
Web Management Page
The HG531 V1 provides an intuitive web management page where you can view or set the HG531 V1
parameters.
Before y’all log in to the HG531 V1 web direction page, ensure that the computer used for the login is
connected to the HG531 V1 and has been configured to automatically obtain an IP address or assigned
with a static IP address.
1.
Open a browser. In the address box, enter
192.168.1.i
. Printing
Enter
.
2.
Enter the login user name (
user
by default)
and password (
@User1234
by default). Click
Login
.
To protect confronting unauthorized access,
change the
user name and
password after the commencement login.
Setting Punch-Upwardly Connexion Parameters
The HG531 V1 works in bridge manner by
default. You need to install and configure
a dial-upward connection
on your computer, and perform it each startup.
Before setting dial-up connection parameters, verify that the HG531 V1 is correctly connected to
your
figurer and you have the punch-up connection account name and password provided by your Internet
service provider (Internet service provider).
This section demonstrates how to set up a Point-to-Point Protocol
over Ethernet
(PPPoE) connectedness on Windows.
On Windows seven
1.
Cull
Get-go
>
Command Panel
>
Network
and Internet
>
Network
and Shaband Center
.
2.
Under
Alter your networking settings
, click
Gear up up a nedue west connection or network
.
3.
In the
Fix a Connection or Network
window, select
Connect to the Internet
and click
Adjacent
.
four.
Click
Broadband
(PPPoE)
.
5.
In
User
name
and
Countersign
, enter the dial-up connectedness account
proper noun and countersign provided past your
ISP. In
Connectedness
name
, name the dial-up connection. Select or deselect
Permit other people to use this
connection
. Then click
Connect
.
8
6.
Return to the
Network and Sharing Center
page. Click
Change adapter settings
. Correct-click theast icon for
the dial-up connection you just set
up and choose
Create Shortcut
from the shortcut menu. In the
displayed dialog box, click
Yes
.
On Windows Vista
i.
Choose
Start
>
Control Panel
>
Network
and Internet
>
Network
and Sharing Center
.
ii.
Click
Set up up a connection or network
.
3.
In the displayed window, select
Connect to the Internet
and click
Next
.
4.
Click
Broadband
(PPPoE)
.
5.
In
User
proper noun
and
Password
, enter the dial-up connection account
name and password provided by your
Internet service provider. In
Connection
name
, name the dial-upwards connection. Select or deselect
Allow other people to use this
connection
. So click
Connect
.
6.
Return to
the
Network and Sharingrand Center
page, Click
Manage network connections
. Right-click the icon
for the punch-up connection
you simply fix up and choose
Create Shortcut
from the shortcut
bill of fare. In the
displayed dialog box, click
Yes
.
On Windows eight
1.
Choose
Settings
>
Control Panel
>
Network and Internet
>
Network and Sharing Center
.
2.
In the displayed window, click
Set upwardly a new connection or network
.
3.
In the displayed window, click
Connect to the Cyberspace
.
four.
Click
Broadband
(PPPoE)
.
5.
In
User
name
and
Password
, enter the dial-up connectedness account
name and password provided by your
Internet service provider. In
Connectedness
name
, proper noun the punch-upwardly connection. Select or deselect
Allow other people to use this
connectedness
. And then click
Connect
.
half-dozen.
Render to the
Settings
page, Click
Available
to see a list of available connection types.
7.
Under
Connections
, select the connection you just fix and click
Connect
to open the punch-up
connection window.
8.
Click
Punch
to connect.
On MAC OS Ten
1.
Choose
Organization Preferences
>
Network
.
2.
Click
+
to add a new network connection.
three.
In the displayed dialog, select
PPPoE
from the
Interface
driblet-downward combo box, then select
Ethernet
(for
cablevision connexion) or
Airport
(for wireless connection) fro1000 the
Ethernet
drop-down combo box, and
enter a service name (default is PPPoE) you specified in
Service Name
.
9
4.
Cull the network name you
gear up from the services list, and enter the dial-up connection account proper noun
and password provided past your ISP in
Account Name
and
Password
. Select or deselect
Think this
password
. Then click
Connect
.
5.
Select
Show PPPoE status in carte bar
.
6.
Click
Advanced
.
7.
In the displayed dialog, select settings as needed.
8.
Click
OK
.
nine.
Render to the
Network
folio, click
Utilise
.
After you successfully prepare up a PPPoE connection, a punch-upward connection icon is
displayed on your
computer desktop.
To connect to the Internet,
double-click the dial-upwardly connection icon. In the displayed dialog box, click
Connect
.
10
4
Wireless Connection Setup
Enabling and Disabling the WLAN on the HG531 V1
The following two methods are available to enable and disable the WLAN on the HG531 V1.
Using the WLAN Button
Press the WLAN button in the HG531 V1 to enable or disable the WLAN. To ascertain whether the
WLAN is enabled, view the WLAN indicator.
Using the Spider web Management Folio
1.
Log in to the web management page.
2.
In the navigation tree, choose
Basic
>
WLAN
.
3.
Configure wireless.
•
Select
Enable WLAN
to enable the WLAN.
•
Clear
Enable WLAN
to disable thursdaye WLAN.
Setting Up a Wireless Connection Using the WPS Push button
Push the WPS push once to quickly prepare a wireless connection betwixt the HG531 V1 and any
WPS-
capable device.
Earlier you set a wireless connectedness using the WPS push, verify the following:
•
The wireless network security manner of
the
HG531 V1
is WPA2-PSYard or WPA-PSK/WPA2–PSK.
•
The wireless device (laptop, tablet, or mobile phone)
to connect to the
HG531 V1
is WPS-capable.
1.
Press the WPS push button on the wireless device to kickoff WPS negotiation. For details, meet the user guide for
the wireless device.
2.
Within 2 minutes,
press and hold the WPS button (less than iii seconds) on the HG531
V1. The WPS
indicator blinks.
When the WPS indicator on the HG531 V1 is steady on, a connection between the HG531 V1 and wireless
device is gear up up. The WPS indicator is on for 300 seconds, then turns off.
Manually Setting Up
a Wireless Connexion
The wireless configuration software provided by Windows is used as an example to describe how to ready
upwardly a wireless connection.
Yous can also use the tool built
into the network adapter to set upward a wireless connection. For details,
meet the network adapter’s user guide.
11
Before setting up a wireless connexion,
record the WLAN proper noun and password of the HG531 V1. The
default WLAN name and password are printed on the HG531 V1 cover label.
Before setting up a wireless connection,
record the WLAN proper name and password of the HG531 V1.
On Windows 7
1.
Click
in the lower right corner of
your desktop.
2.
From the wireless network
list, select the WLAN provided by the HG531 V1. Click
Connect
.
iii.
In the displayed dialog box, enter
the WLAN password and click
OK
.
4.
In the wireless network list, bank check the WLAN connection status. If the condition is
Connected
, the
computer is wirelessly continued to the HG531 V1.
On Windows Vista
one.
Choose
Start
>
Control Panel
>
Network
and Internet
>
Network
and Sharing Center
>
Manage wireless
networks
.
two.
In the
Connecting to a network
window, double-click the WLAN provided past the HG531 V1.
3.
In the displayed dialog box, enter
the password and click
Connect
.
4.
In the wireless network list, check the WLAN connection status. If the status is
Connected
, the
figurer is wirelessly continued to the HG531 V1.
On Windows eight
i.
Cull
Settings
from the correct side of the desktop.
2.
Click
Available
to list the availableastward wireless
networks.
three.
Under
Connections
, select the WLAN provided by the HG531 V1 and click
Connect
.
4.
In the displayed dialog box, enter
the your WLAN countersign and click
Side by side
.
5.
You will be asked if y’all would like to enable sharing between computers and connect to devices inside
the network. Selecting
Yes
will turn on sharing and
No
will leave it off.
6.
In the wireless network list, check the WLAN connection status. If the status is
Connected
, the
computer is wirelessly connected to the HG531 V1.
On MAC OS X
i.
Click
at the top right side of your desktop.
2.
Click
Turn Aerodrome On
.
3.
From the wireless network
list, Select the WLAN provided by the HG531 V1.
4.
In the displayed dialog box, enter
your WLAN countersign and click
Join
.
5.
When a check mark appears next to the HG531 V1’south SSID, the calculator is wireless connected to the
HG531 V1.
12
Changing Your WLAN Name and Password
WLAN admission requires the WLAN name and
password. To amend your WLAN security, regularly
change your WLAN proper noun and password.
1.
Log in to the spider web management page.
ii.
In the navigation tree, choose
Bones
>
WLAN
.
3.
On the displayed page, enable your WLAN.
iv.
On the
Wireless Settings
area, enter your desired WLAN proper name and password in
SSID
and
WPA pre-
shared cardinal
, and click
Submit
.
5
Maintenance Guide
Changing the Web Management
Page User Name and Countersign
The right user name and countersign are required to log in to the web management page. Regular changes
to the web management page user name and password can effectively prevent
unauthorized users from
logging in and modifying important parameters.
i.
Log in to the spider web management page.
ii.
In the navigation tree, choose
Maintenance
>
Account
.
three.
In
New user name
, enter your
desired user name.
4.
In
Electric current password
, enter the currently used password.
five.
In
New password
, enter the new countersign yous specified. In
Confirm password
enter the new password
once again.
half dozen.
Click
Submit
.
When modify password successfully, thursdayis page will jump to the login page, enter the new user name
and countersign to log in.
If you forget the countersign , you
can press and hold the
Reset
push button for 6 seconds or more than, then the
user proper noun and countersign of the Web management page will dorsum
to manufacturing plant value.
This operation
will make your own configuration data lost, please perform this performance with caution.
Restoring Default Settings
Using the Reset Button
If you forget the login password to the spider web management folio or could not access the web management
page, use the reset
push on the
HG531 V1 rear panel to restore the HG531 V1 to its
default settings.
13
Perform this operation with
circumspection. After the HG531 V1 is restored to its default settings,
all custom
data and settings will exist lost,
and the countersign will
be restored to user.
1.
Press the HG531 V1 power button to ability the HG531 V1 on.
2.
Press and hold the reset button for six seconds or more.
The HG531 V1 will restart, which will cause temporary network interruptions.
Using the Configuration Tool
If the HG531 V1 parameter settings were configured incorrectly, log in to the web direction page to
reload the default configuration file and restore the HG531 V1 to its default settings. Perform thisouthward
operation with caution. After the HG531 V1 is restored to
its default settings,
all custom data and settings
will be lost, and the password will be restored to user.
1.
Log in to the web management page.
2.
In the navigation tree, choose
Maintenance
>
Device
.
3.
In
Reset
, click
Restore Default Settings
.
four.
In the displayed dialog box, click
OK
.
14
6
FAQs
What Tin can I Do If I Cannot Op
en the Web Thousandanagement
Page?
1.
Open up Internet Explorer. Cull
Tools
>
Cyberspace Options
>
Connections
>
LAN settings
, and ensure that
all check boxes are deselected.
2.
Check that the reckoner IP address is
192.168.1.*
. (* is any integer
from 2 to 254.)
three.
Bank check that the cables are securely connected to the
HG531 V1
and that the LAN port’s indicator is on.
4.
Ensure that the user name and password are correct.
If the problem persists, restore the HG531 V1 to its default settings.
What Can I
Practise If the HG531
V1 Cannot Access the Internet through
a Wireless Network Adapter Sometimes or If the WLAN Connectedness
Is Unsteady?
This is probably because the HG531 V1 has its cables connected loosely, is placed besides close to electronic
appliances with intensive interferenceast, or
is too far from the computer. Verify that:
one.
The ability and telephone cables are correctly connected to the
HG531 V1
.
two.
Your estimator and the
HG531 V1
are far from electrical appliances that generate stiff magnetic or
electric fields, such as microwave ovens, refrigerators, and cordless telephones.
iii.
The
HG531 V1
is in an open surface area, and there are no obstacles, such as concrete or wooden walls, betwixt
the
HG531 V1
and computer.
iv.
The
HG531 V1
is close to the figurer.
5.
The angle between the
HG531 V1
and figurer is appropriate.
Do not use the HG531 V1 during thunderstorms, every bit the signal strength
may be unsteady and the
HG531 V1 itself may be damaged
due to lightning strikes.
What Tin can I Practise If I Cannot Access the Internet?
i.
Check that the
Ability
indicator on the HG531 V1 is steady on.
If the
Power
indicator is off, perform
further checks equally follows:
a.
Cheque that the
HG531 V1
is turned on.
b.
Check that electricity
comes from the socket and that
the power input from the socket meets the
requirements described on the characterization
of the
HG531 V1
‘south power adapter.
If the voltage is unstable, for example,
fifteen
if the voltage is too high or too low, do
not use the
HG531 V1
. Await until the voltage recovers, and then
utilize the
HG531 V1
.
c.
Bank check that the
HG531 V1
is securely connected to the socket using its
power adapter.
If the
Power
indicator is still off, contact an authorized maintenance center.
2.
Later powering on the HG531 V1, expect for well-nigh
iii minutes. Then bank check whether the
ADSL
indicator
turns steady on.
a.
Bank check that the telephone line is correctly and securely connected, especially the connection between
the telepstrop line and the splitter.
b.
Check that the
HG531 V1
and telephone line are located far
from any electric appliances that generate
stiff magnetic or electric fields. Replace the telephone line when necessary.
If the
ADSL
indicator is still off, contact your network service provider.
three.
Cheque whether the
LAN
indicator is on. If the
LAN
indicator is
off, perform
further checks every bit follows:
a.
Check that the network adapter on your figurer is enabled.
b.
Check that the network cable between the
HG531 V1
and the computer is securely connected. Remove
and then insert the network cablevision or replace the network cable when necessary.
If the
LAN
indicator is still off, contact an
authorized maintenance center.
4.
Cheque that the commuter for the network adapter is
correctly installed.
The following example uses a
computer running the Windows XP operating arrangement to cheque whether the driver for
the network
adapter
is installed:
a.
Right-click
My Figurer
,
and choose
Manage
from the displayed shortcut
carte du jour.
b.
In the
Computer Management
window, click
Device Manager
.
c.
In the right pane of the
Computer Management
window, click
Network accommodateers
.
If no network adapter is found or
if a question
marker (?) or an exclamation mark (!)
is displayed next
to the network adapter icon, the driver for the network adapter is not correctly installed. Re-install the
driver.
5.
Bank check that PPP punch-up software is installed and parameters are set correctly. For details nigh
parameter settings,
see the user guide for the PPP
dial-up software.
six.
Check that you lot take entered the correct user proper noun
and countersign required by
the PPP dial-up software.
The user proper noun and password are provided by your internetwork service provider.
vii.
Check that y’all tin use the PPP dial-up software to
set up up dial-upwards connection. If
the dial-upwards connection
fails, perform further checks as follows:
a.
Close the PPP dial-up software, and power off the
HG531 V1
. Afterward 5 minutes, pwer on the
HG531 V1
, and
apply the PPP dial-up software to punch once again.
b.
Restore the
HG531 V1
to its default settings.
If the problem persists, contact
your network service provider.
16
8.
Cheque that the proxy server of the browser idue south correctly configured. The post-obit example uses
Internet Explorer on the Windows XP operating system to check whether the proxy server of the
browser is correctly configured:
a.
Launch Internet Explorer.
b.
Choose
Tools
>
Cyberspace Options
.
c.
In the
Cyberspace Options
dialog box, click the
Connections
tab.
d.
In the
Local Area Network
(LAN) settings
area, click
LAN Settings
.
e.
In the
Proxy server
surface area of the
Local Area Network
(LAN) Settings
dialog box,
check that
the
Utilise a proxy
server for your LAN (These
settings will not apply to dial-upward or VPN connections).
check box is cleared.
9.
Try to admission more websites to check whether the
HG531 V1
tin access these websites. If the trouble
persists, contact your networone thousand service provider.
I Often Need to Restart the HG531
V1 to Brandish Spider web Pages. What
Can I Practise?
Verify the post-obit:
one.
The
HG531 V1
and other devices such as telephones or fax machines are connected to the plain old
telephone service (POTS) line through a digital subscriber line (DSL) filter. For details nearly how to
install a DSL filter, see the description in the DSL filter manual.
2.
Cables are securely connected to
HG531 V1
ports. Otherwise, network stability may suffer.
3.
Your computer and the
HG531 V1
are far from electric appliances that generate strong magnetic or
electric fields, such as microwave ovens, refrigerators, and cordless telephones.
If the trouble persists, conthuman action your Internet Service Provider.
17
7
Appendix
Technical Specifications
Item
Specifications
Power supply
12 Five DC, 0.5 A
Power consumption
< 5 Due west
Ambient operating
temperature
0°C to 40°C
Ambient humidity
5% to 95% RH (non-condensing)
Dimensions (H ten West x D)
31.5 mm x 118 mm ten 100 mm (1.24 in. x iv.65 in. x iii.94 in.), antenna
excluded
Weight
About 360 chiliad
DSL standard
ADSL standard
ITU Grand.992.1 (G.dmt)
ITU One thousand.994.1 (Yard.hs)
ANSI T1.413 Result 2
ADSL2 standard
ITU G.992.3 (K.dmt.bis) Annex A
ITU G.992.3 (G.dmt.bis) Annex L
ITU G.992.3 (G.dmt.bis) Annex M
ADSL2+ standard
ITU G.992.5 (Chiliad.dmt.bitplus) Annex A
ITU Thousand.992.5 (G.dmt.bitplus) Annex M
WLAN standard
802.11b, 802.11g,
and 802.11n (ii.4
GHz)
DSL transmission rate
Yard.dmt
T1.413
Downlink: 8 Mbit/southward
Uplink: 896 kbit/southward
ADSL
Downlink: 12 Mbit/s
Uplink: 1024 kbit/s
ADSL2+
Downlink: 24 Mbit/s
Uplink: 1024 kbit/s
Wireless transmission
rate
802.11b
Up to 11 Grandchip/s
802.11g
Up to 54 Mbit/s
802.11n (2T2R
antenna applied science)
Upwardly to 300 Mbit/due south
18
Default Settings
8
For More Help
Please visit http://consumer.huawei.com/en/support/hotline for recently updated hotline and e-mail
address in your country or region.
9
Legal Notice
Copyright © Huawei Technologies Co., Ltd. 2015. All rights reserved.
No part of this transmission may exist reproduced or transmitted in any form or
by any ways without prior
written consent of Huawei Technologies Co., Ltd. and its affiliates (“Huawei”).
The product described in this manual may include re-createrighted software of Huawei and possible licensors.
Customers shall not in any mode reproduce, distribute, modify, decompileastward, disassemble, decrypt,
extract, contrary engineer, lease, assign, or sublicense the said software, unless such restrictions are
prohibited by applicative fiftyaws or such deportment are canonical by corresponding copyright holders.
Parameter
Default Value
LAN port IP accost
192.168.1.1
LAN port subnet mask
255.255.255.0
User
name to
log idue north to thursdaye web
configuration page
user
Password to log in to the web
configuration page
@User1234
WLAN proper name (SSID)
Labeled on the production cover
WLAN password (WLAN Primal)
Labeled on the product cover
Dynamic Host Configuration
Protocol (DHCP) server
Enabled
WLAN
Enabled
19
Trademarks and Permissions
,
, and
are trademarks or registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product,
service and company proper namedue south mentioned may be the property
of their respective
owners.
Discover
Some features of the product and its accessories described herein rely on the software installed, capacities
and settings of local network, and therefore may non exist activated or may be limited past local network
operators or network service providers.
Thus, the descriptions herein
may not exactly match the product or its accessories which you purchase.
Huawei reserves the right to change or alter any information or specifications contained in this transmission
without prior nonwater ice and without whatever liability.
DISCLAIMER
ALL CONTENTS OF THIS Manual ARE PROVIDED “AS IS”. EXCEPT Every bit REQUIRED By
Applicable LAWS, NO WARRANTIES OF
ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT Non Limited TO, THE IMPLIED WestARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE
Made IN RELATION TO
THE ACCURACY,
RELIABILITY OR CONTENTS OF THIS Manual.
TO THE MAXIMUM EastXTENT PERMITTED BY Applicable
Police, IN NO
EVENT SHALL
HUAWEI Exist LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL
Damages, OR LOSS OF PROFITS, Business, REVENUE, DATA, GOODWILL SAVINGS OR
Anticipated SAVINGS REGARDLESS OF WHETHER SUCH LOSSES ARE FORSEEABLE OR
NOT.
THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT Apply
TO LIABILITY FOR
PERSONAL INJURY TO THE EXTENT APPLICABLE Police force PROHIBITS SouthUCH A LIMITATION) OF
HUAWEI ARISING FROM THE Employ OF THE
PRODUCT DESCRIBED IN THIS Transmission SHALL
BE
LIMITED TO THE AMOUNT PAID By CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT.
Import and Export Regulations
Customers shall comply with all applicablevision export or
import laws and regulations and be responsible to
obtain all necessary governmental
permits and licenses
in gild to export, re-export or import the product
mentioned in this manual including the software and technical information therein.
Privacy Policy
To better understand how nosotros protect your personal information, please run into the privacy policy at
http://consumer.huawei.com/privacy-policy.
20
ErP Product Information
Hereby, Huawei Technologies Co.,Ltd.
declares that the product
meets the directive 2009/125/EC and
its
implementation regulation (EC) NO 1275/2008 amended by (EC) 278/twenty09,(EC) 642/2009,(EU) 617/
2013,(EU) 801/2013,and its implementation regulation (EC) NO 278/2009.
The power consumption of product
in networked standby if alfifty wired network ports are connected and all
wireless network ports are activated is 4.0 W.
For the product information displayed on
the manufacturers’ freely accessible websites required past (EU)
No 801/2013, please visit http://consumer.huawei.com/certification.
