The main reason for this error File is too large for the destination file system while transferring large files to the Pen Drive or USB Flash Drive is their File System Format. If you want to convert FAT32 USB to NTFS without data loss you can use one of the two ways below to accomplish this.
One issue that I have started to run into especially with longer or 4K video is transferring files larger than 4 GB to a USB flash drive.
File too large for flash drive. Fix The File is too large for the destination file system Error while sending data from pc to pen drive. When transferring large files to an FAT32 partition you are likely to see the file is too large for the destination file system. Most USB Flash Drives are formatted with something called an FAT32 File System.
You can copy the smaller files to the external drive just fine. This is because FAT32 partitions only accept files no more than 4GB. There is enough free space on the drive.
The reason for the error is simple. Click Start to format the drive with a new file system. The Windows Imaging format WIM file in that download which contains the compressed files that the Windows Setup program uses for installing the new version.
If you are well aware of various file systems then you must have a. If your USB flash drive has no important data that you like to save you can simply format it to NTFS. Press Winkey E to open File Explorer and double-click the downloaded ISO file to mount it as a virtual drive.
Fortunately the solution is relatively easy here is how to copy files larger than 4 GB to a USB flash drive memory card or other FAT32 storage device. This is due to FAT32 limitation. So even if the flash drive has tons and tons of available space the sad fact is that your file is too big for the file format.
Here MiniTool offers the best way to convert FAT32 to NTFS without data loss. This system was created in 1995 and for computer-protection reasons imposes limitations on copying a file to your Flash Drive if it exceeds 4GB in size this was a lot of data back in 1995. If youve encountered an error while copying a large file 4 GB or larger to a USB drive that has plenty of free space reporting that the file is too large its probably because the USB drive has been formatted with the FAT32 file system that has a limit on how large a file it can have.
The error message The file is too large for the destination file system also suggests that youre trying to copy a more than 4GB file to a FAT32 storage drive and thats not going to happen. A bit of digging reveals that the max filesize supported on the File Allocation Table FAT version of the Windows file system is 4GB. Formatting the flash drive as exFAT orNTFS will resolve this issue.
The problem occurs because one of the files you want to transfer is larger than 4 GB and your external hard drive or USB flash drive is using the FAT32 file system of which the maximum file size is 4GB. 2 Mount the ISO file and copy its contents to a folder on the local drive. The capacity of your external flash drive or SD card is large.
The file is too large for the destination file system error is caused due to the FAT32 limitations. 8GB 16GB or more. Most USB flash drives use FAT32 which could not store a single file more than 4GB.
Files larger than 4GB can NOT be stored on a FAT32 volume. The fix is to convert the USB flash drive to NTFS file system that has no file size limit. Now that were sporting a large-file-friendly flash drive its time to transfer a large file and see what happens.