Driver Qualcomm Hs Usb Qdloader 9008

If you are trying to install
Qualcomm Drivers
or Qualcomm HS-USB QDLoader 9008 Drivers, then this post may help you to install Qualcomm HS-USB QDLoader 9008 Drivers properly. This driver is comfortable with
32-bit and 64-bit CPU architecture
or any
Windows 7, 8, 8.1, and 10
operating systems. You will need to install this driver to connect your Qualcomm device in EDL Mode or Download Kecenderungan. Download
Qualcomm HS-USB QDLoader 9008 Drivers
from below and follow the steps to install it manually.

For some reason, if you want to back in stock firmware or unbrick your dead Qualcomm device, then Qualcomm drivers must be installed on your PC. There are many ways to install stock firmware or unbrick your device. While some support it through the fastboot commands, others like Xiaomi, Samsung, LG, Sony have a dedicated software for it. But to connect the phone with this software first connect to the PC with a USB cable, and when the USB drivers adequately connected between the phone and USB, then the transfer process starts.

Qualcomm Drivers

If you are trying to flash Stock ROM with QFil Tool or want to unbrick dead any Qualcomm device, then Qualcomm drivers must be installed on your pc. Nowadays, most of the smartphone comes with Qualcomm chipset. This driver is required for any Android devices since they come with a Qualcomm Chipset like Oneplus, Xiaomi, Realme, Samsung, LG, Motorola, Lenovo, etc.

Don’falak worry about it, here we share two deferent easy methods of installing these Qualcomm Drivers. The first method is a Direct Installation using the Setup Wizard. The second method has manually installed the driver into the Device Manager.

Pre-requirements:

If your device is working, then only follow the second step, either skip this step if your device is dead.

1. Download and install the
   ADB and Fastboot Tools
   on your PC.
2. Enable
   USB debugging
   on your device.
3. If you are using Windows 8 or later versions, you need to disable
   Driver Signature Enforcement.

Download Qualcomm HS-USB QDLoader 9008 Driver 64-bit & 32-bit

There are two versions of the driver available for download; you need to download only one driver based on your installation method.

For Automatic and Direct Install:

• 32-bit: QDLoader_HS-USB_Driver_32bit_Setup.exe
• 64-bit: QDLoader_HS-USB_Driver_64bit_Setup.exe
• HS-USB_Diagnostics_Driver

For Manually Install:

• QDL-DRIVER-2020.zip
• Qualcomm-Driver.zip

How to Install Qualcomm HS-USB QDLoader 9008 Drivers

As mentioned, there are two steps to install these Qualcomm Drivers. The first one is too much easy to install; it is automatic and direct install. We recommended you to follow the first step usually. If the first method doesn’t work on your PC, then follow the second step, in this method, you need to install the driver fully manually. Both methods are briefly described below:

Method 1: Automatic and Direct Install

• Download the Qualcomm 9008 Driver
  32-bit
  &
  64-bit
  setup file based on your CPU’s architecture.
• Extract the downloaded zip file to a folder on your computer.
• Now Run “QDLoader_HS-USB_Driver_64bit_Setup.exe”. (Must check you CUP’s architecture)
• A popup screen will show, click on the “Next” option.

• Then select “I accept the terms in the license agreement” and then click “Next.”

• After that, click on the “Install” button to install Qualcomm HS-USB QDLoader 9008 drivers on your Windows PC.

• Once the installation is completed, click on the ‘Finish‘ option to exit the Installation Wizard.

That’s it. The Qualcomm Drivers are now successfully installed on your computer. Now you can customize your Android device.

Method 2: Manually Install

• Download the
  Qualcomm Drivers zip
  file.
• Extract
  the downloaded zip file to a folder on your computer.
• Connect
  your Android device to PC using a
  USB cable.
• Go to the ADB and Fastboot folder and open
  cmd windows, thereby “Shift + Mouse Right” and click “Open command window here” option.
  • You can also open it by Open command prompt and type
    cd ADB and Fastboot Folder location command.
• Type the below command to boot your device to
  EDL mode:
• Now go to
  Control Panel > Device Manager
  on your PC.
• In Device Manager: you will see your device listed as
  QHUSB_BULK
  under the Other devices section, along with a yellow exclamation mark. (It mean your pc don’t recognize your device.)

• Right-click on it and click select “Update device software.”
• Click on ‘Browse my computer for driver software‘.

• Now select the Qualcomm drivers folder and click on “Next.“

• At this point, Windows Security Popup may come, click “Install this driver software anyway.”

• Once the driver installed and PC recognized your Phone, then the device will be shown as
  Qualcomm HS-USB QDLoader 9008, and there will be no yellow exclamatory signs.

• You’re done!

Hope this guide will help you to install Qualcomm HS-USB QDLoader 9008 Drivers on your computer, now you can flash any ROM in EDL or through tools. If you face any kebobrokan during installation, please comment below we will be happy to help you.