Download Driver Usb 2.0 Serial Arduino

FTDI Driver Installation

Development boards such as the SparkFun RedBoard for Arduino and the Arduino Uno require special drivers or code that tells the computer how to interact with them. This guide is here to help you get this driver software installed as quickly as possible and so you can get back to edifice circuits and learning about electronics!

These instructions use to both the Arduino Uno, the Arduino Uno SMD, and the SparkFun RedBoard for Arduino.

Note:
You should only have to complete this process one time. In one case the right drivers are installed, your lath will be recognized by your reckoner every time y’all plug it in later.

Annotation for Educators:
You will most likely need to obtain administrative privileges from your network or It administrator in order to install these drivers.

Scroll down to the corresponding department for whichever operating organization (Bone) you are using.

Windows

Plug the board into your computer. Windows will likely mutter virtually the device non having the correct driver. It may try to notice it. If you have never plugged in a similar device to your computer, it probably won’t find a driver to use. Luckily, when y’all downloaded the Arduino IDE, information technology as well came with all the necessary drivers.

To install the correct driver, open up the
Device Manger. This can be found be searching for “device managing director” in the first bill of fare. One time Device Manager is open, you should see a device with a tiny xanthous triangle and exclamation mark adjacent to it.

If you lot plugged in a SparkFun RedBoard, it will look like the prototype on the left. Plugging in an Arduino Uno will result in the image on the right.

Right-click on the unknown device, and select
Properties.

In the backdrop window, select
Driver Details.

Select the
Browse my calculator for commuter software
option.

Navigate to the destination where you installed the Arduino IDE. On Windows, this volition most probable be in your Plan Files folder. Navigate to the drivers folder found inside the main Arduino folder. Yous can select the entire binder or the specific driver. needed Your path should wait something like this simply may vary:

Once the driver installation is complete, you should see the device reappear in the Device Manager window as a usable COM port. The number will vary depending on how many devices yous have plugged into your computer. The RedBoard volition appear every bit a
USB Series Port, as shown in the left image. The Uno will announced equally an
Arduino Uno, as shown in the right image.

In the Arduino IDE, yous should see that same serial port available nether Tools -> Port.

If you are experiencing problems, please see our
in-depth instructions.

MacOS

Plug the lath into your figurer. Once plugged in, the operating system should recognize it as the appropriate device. In the Arduino IDE, click Tool -> Ports to ensure the device has been recognized. The SparkFun RedBoard will appear a
cu.usbserial-XXXXXX
device.

The Arduino Uno will appear equally a
cu.usbmodemXXXXXX
device.

If you practise not see an bachelor serial port in the Arduino IDE subsequently plugging in your board and waiting a moment, so you may need to install the drivers by mitt. To practice so, delight see our
in-depth instructions.

Linux

Plug the board into your computer. In one case plugged in, the operating arrangement should recognize it as the appropriate device. In the Arduino IDE, click Tool -> Ports to ensure the device has been recognized. The SparkFun RedBoard will appear a
ttyUSBXX
device.

The Arduino Uno volition appear as a
ttyACMXX
device.

If you do not see an available serial port in the Arduino IDE afterwards plugging in your board and waiting a moment, then you may need to install the drivers by hand. To do so, please run across our
in-depth instructions.