Does a Sony Blu Ray Player Need Firmware Updates?
Blu-ray Disc Player Firmware Update
Important:
This file is only for use with the models identified. Not all models are sold in all countries.
This information is for the following models:
- BDP-BX650
Well-nigh this download
Benefits and improvements
This utility upgrades the Blu-ray Disc™ Player firmware to version
M26.R.0214
and provides the post-obit benefits:
Improvements over firmware version M26.R.0205
- Improves network services
- Improves a status where the thespian hangs during YouTube® playback after playing a CD
Benefits provided by previous upgrades and included in version M26.R.0214:
- Improves WiFi router connectivity to address an event subsequently connecting the BD player to a LAN
System Requirements
Operating Systems
- Mac OS® X
- Windows Vista®
- Windows Vista® 64-bit
- Windows® 10
- Windows® ten 64-scrap
- Windows® seven
- Windows® vii 64-flake
- Windows® 8
- Windows® 8 64-scrap
- Windows® 8.i
- Windows® eight.one 64-chip
- Windows® XP
File Info
File Name
- UPDATE_M26R0214.Nix
File Version
- M26.R.0214
File Size
- 126.63 MB
Release Engagement
- 06-05-2015
Before You Start
Bank check the Current Firmware Version
- Power on the television and brand sure it is tuned to the inputs to which the Blu-ray Disc player is connected.
- Ability on the Blu-ray Disc player.
Annotation:
If the Blu-ray Disc player starts to play a disc, press the
Stop
button and wait until the
Habitation Screen
menu is displayed on the television before proceeding. - Use the pointer keys on the remote control to select
Setup
–
Organization Settings, and then press the
ENTER
button. - Employ the arrow keys to select
Organisation Information, and and then press the
ENTER
button. - The firmware version currently installed on the Blu-ray Disc player will be listed on the boob tube screen.
- If the last four digits of the version number are
0214
or higher, it is not necessary to install this firmware update.
Download & Install
How To Go the Firmware Update
There are ii means to update the Blu-ray Disc actor firmware:
-
Update via Internet:
- The
Update via Cyberspace
functioning is straightforward. Sony highly recommends that y’all use the
Update via Net
method. - You lot will demand to connect the Blu-ray Disc actor to your Internet source using an Ethernet cable or wireless router.
- Please see the
Update via Cyberspace Instructions
section beneath, for more information.
- The
-
Update via USB Memory:
- If y’all cannot connect the Blu-ray Disc player to your Internet source, delight utilise the USB update method.
- Please see the
Download and Transfer the Update File to Your USB Storage Device
section below, for more than information.
If you have questions or require assistance, delight contact
Sony Support at 1-866-909-SONY (7669).
Update via Internet
The Update via Internet performance is straightforward. Sony highly recommends that you use the Update via Internet method to update the Blu-ray Disc player firmware.
-
Important Notes
- If you have not done and so already, please
cheque the current firmware version
to determine if this firmware update is needed for your Blu-ray Disc player. - Alert! Please follow the update instructions carefully. Failure to follow the instructions may interrupt the update procedure and may cause the Blu-ray Disc role player to be unresponsive or to require repair.
- Warning! Practice not power off the Blu-ray Disc role player or disconnect information technology from the Air conditioning ability outlet. Loss of power during the installation of the firmware update may cause the Blu-ray Disc player to be unresponsive or to require repair.
-
In gild to use this update method information technology is necessary to accept the histrion correctly connected to an agile Internet connection.
Note:
If you cannot connect the player to your Internet source, delight see the
Download and Transfer the Update File to Your USB Storage Device
section below for information about firmware update USB options. - In club to perform the firmware update, it is necessary to have the player correctly connected to a compatible television.
- It is recommended that you have a network speed above 512Kbps to use the Update via Internet to avoid a slow firmware update process.
- It is highly recommended that you print out these instructions for employ every bit a reference during the installation process.
- If you have not done and so already, please
-
Update via Net Instructions
WARNING! Please follow the update instructions carefully. Failure to follow the instructions may interrupt the update procedure and may crusade the Blu-ray Disc player to be unresponsive or to require repair.
Note:
The firmware update process usually takes about 15 to 30 minutes, depending on organization configuration and network connection.- Power on the television and make sure it is tuned to the inputs to which the Blu-ray Disc player is continued.
- Make sure the Blu-ray thespian is continued to your Internet source using an Ethernet cable or wireless router.
- Ability on the Blu-ray Disc role player.
- If at that place is a disc in the player, please remove the disc.
- At the
Home Screen
menu, use the arrow keys on the remote control to select
Setup
–
Software Update
and then press the
ENTER
button. - A
New Software Version bachelor
message will be prompted. Select
OK
to keep with the Update via Cyberspace procedure. - The message
Update to a new software version
along with the latest software version is displayed on the television receiver. - Select
Showtime
and and so press the
ENTER
push button. The first portion of the update procedure begins. - During the update, the progress bar showing
ten %
and the download capacity are displayed on the tv.
Note:
The
x
changes to
0
through
100, indicating the update progress. - When completed, the Blu-ray Disc player volition restart itself and the second portion of the update will begin.
- Over again the progress bar showing
x %
and the download capacity are displayed on the television.
Note:
The
x
changes to
0
through
100, indicating the update progress. - Once the firmware update is complete, the Blu-ray Disc player automatically powers off and and so back on.
WARNING! Do not operate or power off the player until the update is complete. Doing so may cause the Blu-ray Disc thespian to be unresponsive or to require repair. -
Check the current firmware version
to ostend that the update has successfully installed.
Annotation:
If the terminal four digits of the version number are
0214, the firmware update was successful.
If y’all have questions or require assistance, please contact
Sony Support at ane-866-909-SONY (7669). -
Update via Internet FAQ
Q:
When running the Update via Net, the television displays the message,
Connection status cannot be confirmed
or
This device is not connected to network
and y’all cannot perform the firmware update.A:
There may be a problem with the network connexion. Verify that the network connection and settings are correct.- For a wired connectedness, check the Ethernet cable to make sure information technology is securely continued to the
LAN(100)
terminal on the actor and to the Internet source. - For a wireless connection, bank check that the wireless router is powered on and connected to an Internet source.
- Check the Blu-ray Disc role player network settings and confirm that the role player has its own IP accost.
Annotation:
If you lot use a proxy server, enter the IP accost of the proxy server you utilise, instead of the proxy host proper name, in the
Proxy Server
input field. - Confirm both the Physical Connection and Internet Access are
OK
in
Network Settings
>
Network Connection Status. - Follow the
Update via Internet Instructions
again.
Q:
The ability was close down during the update process.A:
Ability on the Blu-ray Disc player and endeavor the update procedure again. - For a wired connectedness, check the Ethernet cable to make sure information technology is securely continued to the
-
Q:
The firmware update process is even so non finished after running for more than 30 minutes.A:
The recommended network speed to perform the Update via Net is 512Kbps and to a higher place.If the firmware update process is still not finished, please cancel the process and retry with the
Update via USB Retentivity Instructions.If the trouble still persists, please contact
Sony Back up at 1-866-909-SONY (7669).Q:
While updating the firmware,
Update failed
screen appears.A:
Please perform the following procedure:- Ensure there is no problem with your network connection to the Net.
- At the update failed screen, select
OK
to try the Update via Net over again or select
Cancel
to abolish the Update via Internet process. - If the symptom does not improve after trying the Update via Internet again, please download the firmware from the web and perform the Update via USB Memory.
- Cancel the Update via Net process and proceed with Update via USB Memory process.
Q:
The firmware update continues to fail afterward multiple tries.A:
Please download the firmware from the web and perform the USB memory update. For more information, please see the
Download and Transfer the Update File to Your USB Storage Device
section.If the problem notwithstanding persists, please contact
Sony Support at 1-866-909-SONY (7669).
Download and Transfer the Update File to Your USB Storage Device
If you cannot connect the Blu-ray Disc player to your Internet source, please use the USB update method.
-
Important Notes:
- If y’all accept non done then already, please
check the current firmware version
to decide if this firmware update is needed for your Blu-ray Disc player. - WARNING! Please follow the update instructions carefully. Failure to follow the instructions may interrupt the update process and may cause the Blu-ray Disc actor to be unresponsive or to require repair.
- WARNING! Do non power off the Blu-ray Disc player or disconnect it from the AC power outlet. Loss of power during the installation of the firmware update may cause the Blu-ray Disc thespian to be unresponsive or to crave repair.
- Recommended operating system for the computer that will download the firmware update:
- Macintosh Bone® X version ten.5 or later
- Microsoft® Windows® 8 / viii.1
- Microsoft Windows 7
- Microsoft Windows Vista®
- Microsoft Windows XP
- In society to perform the firmware update, it is necessary to have the thespian correctly connected to a compatible television.
- It is highly recommended that you print out these instructions for employ every bit a reference during the installation process.
- If y’all accept non done then already, please
-
Update via USB Memory Instructions
- Download the
UPDATE_M26R0214.ZIP
file to a temporary or download directory (please note this directory for reference). - Get to the directory where the file was downloaded and verify that the size of the
UPDATE_M26R0214.Goose egg
file is
132,782,661 bytes.- Right-click the
UPDATE_M26R0214.Zippo
file, and click
Properties. - On the
UPDATE_M26R0214.Nothing Properties
screen, verify that the
Size:
listed is
126 MB (132,782,661 bytes).
Annotation:
The
Size on disk:
listed may exist dissimilar. That is normal. - If the file size is different than the
132,782,661 bytes, please download the
UPDATE_M26R0214.ZIP
file once again.
- Right-click the
- Extract the update file from the
UPDATE_M26R0214.Nothing
file.-
For Mac OS® X operating organisation:
- Go to the location where the file was downloaded and double-click the
UPDATE_M26R0214.ZIP
file. - A new folder will be created called
UPDATE.
- Go to the location where the file was downloaded and double-click the
-
For Microsoft® Windows Vista®, Windows® seven, or Windows eight / 8.1 operating system:
- Go to the directory where the file was downloaded and right-click the
UPDATE_M26R0214.ZIP
file, so click
Extract All.
Annotation:
For Windows 8 / 8.i, the default settings for Internet Explorer® will save the file in the
Downloads
folder. To locate the
Downloads
binder, click the
Desktop
tile from the
Offset
screen and and then locate the downloaded file using Windows Explorer. - At the
Extract Compressed (Zipped) Folders
window, click
Extract. - A new folder will be created called
UPDATE.
- Go to the directory where the file was downloaded and right-click the
-
For Windows XP operating organization:
- Go to the location where the file was downloaded and right-click the
UPDATE_M26R0214.Null
file, and then click
Excerpt All. - At the
Extraction Wizard
dialog box, click
Next. - Click
Next. - Click
Finish. - A new folder will be created chosen
UPDATE.
- Go to the location where the file was downloaded and right-click the
Note:
Four files will exist extracted:
MSB26-FW.BIN
and
MSB26-FW.ID,
MSB26-FW_MB.BIN, and
MSB26-FW_MB.ID -
For Mac OS® X operating organisation:
- Connect a compatible USB storage device to your calculator.
- Transfer the update folder to the USB storage device:
-
For Mac OS® X operating system:
- Drag and drop
UPDATE
folder to the root folder of the USB device.
- Drag and drop
-
For Windows XP operating organization:
- Go to the directory where the folder was created, and and then right-click the
UPDATE
folder. - From the menu, click
Transport To…, and then click the bulldoze where your USB bulldoze is located - The update folder will be copied onto your USB device.
- Go to the directory where the folder was created, and and then right-click the
Note:
The update will not be performed if the file is not copied to the root directory of the USB device or if the proper name of the file is modified. -
For Mac OS® X operating system:
- Remove the USB device from your computer.
- Please continue to the next section.
- Download the
Update via USB Memory
-
Update via USB Memory Instructions
Alarm! Do not power off the player or disconnect information technology from the Air-conditioning power outlet. Doing so may damage the player to the point of requiring repair.
WARNING! Practise non press any buttons, except as instructed, until the update is complete. Doing and so may damage the role player to the point of requiring repair.
Note: The software update takes up to 5 minutes to consummate. During the update procedure, the screen on your tv will display progress data, or may be blank. This is normal.
IMPORTANT: Delight exercise non remove the USB storage device until the update is complete.
- Power on the boob tube and brand certain it is tuned to the inputs to which the Blu-ray Disc player is connected.
- Power on the Blu-ray Disc player.
- Make sure no other USB devices are connected to Blu-ray Disc histrion, if there are, please remove it from Blu-ray Disc Player.
- Insert the USB storage device containing the update files into USB port located on the forepart panel of the player.
- At the
Home Screen
carte du jour, use the arrow keys on the remote control to select
Setup
–
Software Update, and so press the
ENTER
button. - A
Software Update
confirmation will be displayed. Select
Update via USB Retentivity, and then printing
OK
to offset the Update via USB Memory procedure. - The message
Update to a new software version
is prompted and the latest software version is displayed on the television. - Select
OK
and and then press the
ENTER
button. The first portion of the update process begins. - During the update, the progress bar showing
x %
is displayed on the television.
Note:
The
ten
changes to
0
through
100, indicating the update progress. - When completed, the Blu-ray Disc player will restart itself and the 2nd portion of the update volition begin.
- Once again the progress bar showing
10 %
is displayed on the television.
Note:
The
x
changes to
0
through
100, indicating the update progress. - Once the firmware update is complete, the Blu-ray Disc player automatically powers off and then dorsum on.
WARNING! Do not operate or power off the player until the update is complete. Doing then may result in your role player being unresponsive and requiring repair. - Remove the USB device from the histrion.
-
Check the current firmware version
to confirm that the update has successfully installed.
Note:
If the last four digits of the version number are
0214, the firmware update was successful.
-
Update via USB Memory FAQ
Q:
Unable to select
Update via USB Memory.A:
Delight perform the post-obit procedure:- Confirm the USB device is properly connected to Blu-ray Disc player.
- Ostend the USB device is uniform with the Blu-ray Disc player
If the problem still persists, delight contact
Sony Support at 1-866-909-SONY (7669).Q:
Caution message
There is no update file.
displayedA:
Please make sure the update folder is correctly named
UPDATE
(with all capital letters) and all the files are included inside the
UPDATE
binder:- MSB26-FW.BIN.
- MSB26-FW.ID
- MSB26-FW_MB.BIN
- MSB26-FW_MB.ID
Please follow the steps in the
Download and Transfer the Update File to Your USB Storage Device
section.If the trouble still persists, please contact
Sony Back up at 1-866-909-SONY (7669).Q:
Circumspection message
The file is corrupted.A:
The download may have failed. Please download the
UPDATE_M26R0214.Nil
file again and follow the steps in the
Download and Transfer the Update File to Your USB Storage Device
department.If the problem still persists, please contact
Sony Support at 1-866-909-SONY (7669).Q:
The power was close down during the update process.A:
Power on the player and try the update process again.Q:
The
UPDATE_M26R0214.Nothing
update file I downloaded from the update web site cannot be extracted.A:
The download may have failed. Delete the downloaded file and follow the steps in the
Download and Transfer the Update File to Your USB Storage Device
section.Q:
The firmware update process is however not finished later on running for more than 30 minutes.A:
Please contact
Sony Support at 1-866-909-SONY (7669).