Dji Phantom 3 Professional Controller Firmware Update UPDATED

Firmware is an important update from many points of view. Many drone owners don’t know how to update the firmware on their Phantom 3. This article will teach yous
How To Update DJI Phantom 3 Firmware

. This is something you will demand to practise often and then it’due south important that y’all are familiar with the process.

Install The Firmware On Your Phantom

When updating a Phantom iii Professional person it is a good thought for a fan to be pointed at the gimbal during idle fourth dimension. When the Phantom is left idle for too long, the gimbal can overheat and go damaged.

1.  Brand sure your Phantom battery has at to the lowest degree 50% charge. When you press the ability switch, at to the lowest degree two lights should be visible. Yous can stop right here to charge your battery up to 50%.
2.  Turn off both the remote controller and your Phantom.
3.  Take out the props and remove the gimbal.
4.  Insert your memory card in the memory slot on the camera.
5. Install the Phantom bombardment in your Phantom and plow it on. For power on the battery press and release quickly the push – then press and hold the button in place for 2 seconds.
6. To monitor the installation process, you can use the status lite. It should practise the following.

• Flash dark-green when your Phantom is getting started.
• While the firmware update process is underway, alternating betwixt greenish and red.
• When the firmware update is consummate, your computer will plow solid green. A D-DD beeping audio volition also be heard.

Delight note: Lights under the Phantom artillery may flash in unlike colors or get off. The Phantom may beep in dissimilar patterns, fifty-fifty a single tone. You might encounter the photographic camera motion or rotate. You lot can ignore all these bug and await for the status light (or red if it fails) to modify from solid green to solid cherry-red. This could take as long as xx minutes.

     7. Plow off your Phantom’due south battery when the photographic camera state light turns to solid dark-green. Y’all can power down your battery by pressing and releasing the power buttons chop-chop. Then, immediately concur the button for 2 seconds.

    eight. To confirm that the firmware was successfully installed, open the TXT files that were created on your memory stick and make certain that the end line includes success.

    9.  Delete your TXT file on your retentiveness card.

Why Should I Upgrade My Firmware?

Firmware is basically software that runs a specific device. Nearly all devices have firmware. This includes modems, calculators, smartphones, and other smart devices. The firmware controls the interaction of all the electronics in the drone and controller, then it’southward non surprising that drones are complex. If your Phantom is running fine, why carp upgrading the firmware?

• Enjoy new features from DJI.
• Repair bugs found in the current firmware
• Support for 3rd-political party accessories and the most recent apps.

We recommend that you update the firmware of your Phantom as soon as possible after DJI releases it. It’southward possible that an issue has been introduced in the one-time firmware. It’south not platonic for something to forestall your aircraft from having issues in the future. Therefore, it is always a good idea to update the firmware as shortly as possible.

Where Tin I Find The Most Recent Phantom iii Firmware Updates?

You can ever detect the latest software for whatsoever DJI product on their official website. These links apply to
Phantom 3. Below each P3 model, we have listed the nearly current firmware every bit of the writing.

• Phantom three Pro (Download link)
• Phantom 3 Advanced (Download link)
• Phantom three Standard (Download link)
• Phantom 3 4K (Download link)

The well-nigh recent firmware update will exist labeled “Firmware version XYZZ”. These numbers will bespeak the most contempo firmware. You can keep upwardly-to-date with the latest firmware releases by using your DJI app or DJI newsroom.

How Can I Verify The Latest Firmware Version Of My Phantom?

This is a elementary task, peculiarly since DJI GO will notify you when upgrades are needed.

• Plow on the airplane and the controller
• Connect your smartphone or tablet to your Phantom
• Install the DJI GO App.
• Enter Photographic camera view.
• Tap the settings icon in the upper-right corner of your screen. It is indicated by three horizontal lines.
• Curl downwards to the lesser of all the options and click on ‘Nearly. The electric current firmware version of your remote and aircraft will exist displayed.

What Should I Do Before Updating Firmware?

Both the remote control and aircraft battery must be fully charged. You should accept these items on hand:

• You can find the latest DJI GO version on the Google Play Store or App Store for Apple tree devices.
• A microSD carte fast with at least 100mb free infinite (let’south increase information technology to 200mb for safety)
• Stable internet connectivity
• It takes most an hour to complete the firmware update

How To Update DJI Phantom 3 Firmware

All Phantom 3 models (Pro-, Advanced, Standard, and 4K) are almost identical. The video below will testify you how to upgrade the firmware. Y’all can also see our guide step-by-step with text instructions if you prefer.

Using the DJI Get App (Compatible with Phantom 3 Standard and Phantom 4K).

• Turn on the Remote Controller and the Shipping.
• As normal, connect to the Wi-Fi network of your Aircraft.
• You can launch the DJI Go app with your tablet or phone just similar you lot would ordinarily.
• Tap the prompt at acme of the screen to receive a notification that a new firmware update is available.
• Connect your mobile device now to your office or home wifi to connect to the Internet.
• Render to DJI Become and click the “Download Now” button at the bottom.
• A progress bar will appear, which will display the progress of your download.
• After the file has been downloaded, you lot will need to change the wifi networks again. To do this, go to the settings screen of your phone or tablet. Change your wifi connection to the controller’southward network from your office or home network.
• Now you lot can re-open up DJI Go and click on the “Start Upgrade” button.
• Y’all will once more encounter a progress bar to signal how the firmware update progresses. During this time, please don’t close downwardly your shipping or mobile device.
• After the upgrade is completed, click on the “Complete” push in the DJI Go app and and so restart your aircraft. The new firmware will be installed.

Use A Computer (Compatible With All Phantom three Ranges)

1. Go to the appropriate DJI downloads folio to catch the latest firmware: Phantom3 Professional Phantom3 Advanced Phantom3 Standard Phantom3 4K
2. Save the null file to a binder on your desktop. The firmware is independent in the.bin file.
3. Your Micro SD bill of fare tin can be inserted into the slot in the Phantom iii’s Gimbal.
4. Use the USB cablevision provided with your Phantom to connect your estimator to the Micro-USB port. You tin can also remove the SD carte from your Phantom and so insert information technology into your computer with a card reader.
5. As normal, plow on your
   Phantom 3
   drone.
6. Re-create the.bin file that you just unzipped to your desktop and identify information technology at the root of your SD card. It should now be listed as a storage device on the computer. The root is the SD card’s domicile location, and not any subfolders or folders.
7. In one case the file is copied, disconnect the USB cablevision connecting the shipping to your computer. You lot can also remove the SD card from your calculator and put information technology back into the aircraft.
8. Now, the aircraft will automatically upgrade its firmware using the.bin file you have placed on the SD Card. The process can take upwards to forty minutes so don’t exist alarmed that information technology takes so long. The device might make strange sounds or reboot during the update process. This is normal and expected.
9. Subsequently the update is complete, you will see a small LED on the gimbal.

• Flashing green and cherry means that Firmware is yet being upgraded.
• Solid light-green light – The firmware update is complete.
• Solid crimson – The firmware update was unsuccessful.

10. The firmware upgrade is complete when the condition LED on your Phantom 3 gimbal turns solid green and does not flash,

11. You should also pay attention to the sounds your gimbal makes. A beep every half second ways that the updated file is beingness recognized and loaded. Four beeps per row indicate that the file is in progress. Finally, one short beep indicates that the update is complete.

This completes the firmware upgrade. Earlier you can go along using your aircraft, please delete the bin file.

How Practice I Update The Firmware Of The Phantom iii Controller

You volition need to update the firmware of your Phantom 3 Professional or Avant-garde quadcopter when information technology is necessary. Please ensure that you have the following data before updating the firmware on your Phantom’southward remote controller:

• Upgrading the DJI Get app from the Google Play Store to the latest version is recommended.
• Brand sure your remote command is fully charged
• Make certain that the Aircraft is switched off
• You can connect your tablet or phone to the internet via the remote.
• To download the firmware packet via DJI Get, ensure you lot have at to the lowest degree 50MB free space on your smartphone or tablet.

The procedure of updating the controller’s firmware is made much simpler past the DJI GO app:

1. Use the provided USB cablevision to connect your Phantom 3 remote control to your smartphone or tablet.
2. As normal, plough on the remote.
3. Open up the DJI Get App on your tablet or phone.
4. As normal, enter the camera interface.
5. Tap the “Flight Status” bar in your app (the large colored cake at top of the screen).
6. Tap on the “Overall Status” option. A message should appear proverb “Upgrade Required”.
7. Tap the “Download Firmware” option in the app.
8. Once the firmware is downloaded, click on the “Start to Upgrade” pick at the bottom.
9. To betoken that firmware upgrades have begun, the remote controller will emit a warning audio and the LED on the lesser left will glimmer blue.
10. The DJI Get app will brandish a progress bar in real-time that shows how far you are from the completion of your update.
11. The firmware upgrade is complete when the progress bar reaches a total height and the LED on your remote controller changes to solid green.

Update of Bombardment Firmware

Yous should update each quadcopter’s firmware if y’all take multiple batteries. Afterwards the update has been completed, you will demand to change the Phantom iii’southward battery. The Phantom software will not exist updated, but the smart batteries will. This procedure can exist repeated with every bombardment.

Here Are Some Useful Tips For Updating Phantom 3 Firmware

• You should but have 1 firmware pack on your MicroSD card. Earlier you begin the process, verify that it is true.
• Ensure that your drone’s file organisation and controller back up media files with ExFAT or FAT32 file systems during an upgrade
• To avoid any problems with the downloading procedure, your internet connection must be stable.
• Before you begin the firmware update, make sure you lot enable “Aeroplane Mode” on your phone to ensure that you are non interrupted by incoming calls during the process.
• If the drone is nevertheless flying, it’s not a proficient idea to run updates. This functioning should be performed only on the ground, in compliance with all safety regulations.
• After the update, y’all will demand to synchronize your device.

To flash the controller, insert a Micro SD drive with the firmware in your
Phantom 3. Connect the remote to the drone using a USB cable. The firmware volition automatically offset.

FAQs

Conclusion

Every DJI drone must be updated on a regular basis. In this post, we go over the methods and crucial pre-steps for updating the firmware. Firmware is the software that controls all of the drone’s functions and capabilities. The command software communicates with all nodes and systems on the drone, rendering flight impossible. The flight would be impossible without firmware. The availability of the most recent firmware version is disquisitional to flight rubber. Each update contains fixes for discovered flaws and weaknesses that might have disastrous repercussions.

Please share this postal service if you plant information technology helpful so that others might see its contents besides! Cheers for reading!