Device Is Busy Try Again Later Hp Printer

When attempting to scan with your HP printer / scanner, if you are experiencing the “Scanner Busy” error, so you have reached the right place. Here, we will hash out in detail the types and causes of this problem, and then that you lot go a comprehensive understanding of this issue and are able to fix it without visiting the HP service center. In this guide, you will likewise detect multiple solutions of
how to set “Scanner Busy” trouble
in HP printer / scanner.

Types of “Scanner Busy” Problem

The “Scanner Busy” error is usually displayed in two forms. The causes behind both these errors are the same and so are the solutions. Therefore, if you are experiencing any of the two errors mentioned below, and then keep reading as the solutions given below will help y’all in resolving your trouble.

• Error 1:  “Scanner Busy” Please wait until the previous chore is consummate and so try again. Unable to scan.
• Error ii: Scanner reported and fault. The scanner is decorated.

If there are some other variations of the “Scanner Busy” problem in HP printer / scanner, then you can try the solutions given beneath for them besides.

Causes behind “Scanner Decorated” Problem

Usually, when you see the error “Scanner Busy”, so it ways that your HP printer / scanner is beingness used by another application. However, if y’all are sure that no other application is using your HP printer / scanner, but y’all are still experiencing the “Scanner Decorated” error, then the causes tin be one of the post-obit:

• Bereft Power: Sometimes the scanner failure problem occurs because the printer is unable to provide sufficient power to the scanner to consummate the job. The simplest solution in such cases is to completely discharge the electric current of your printer.
• Mechanical Issue: Sometimes this scanner fault is caused because the printer scanner machinery of your HP product has adult some mechanical bug. The all-time way to resolve this error is to visit the HP service center. Nevertheless, it’s important that you are sure about the mechanical trouble.
• Malfunctioning WIA Service: The Windows Epitome Acquisition (WIA) service enables applications to interact with imaging hardware, similar scanners, cameras, etc. Notwithstanding, sometimes this Windows service starts to malfunction and your imaging/graphics application is unable to properly connect with your imaging hardware, in which case you experience “Scanner Busy” error.

Some of the issues causing the “Scanner Busy” error in HP printer / scanner can exist resolved by you. Therefore, in the next department, we will discuss the solutions for this trouble.

How to Prepare “Scanner Decorated” problem in HP Printer / Scanner

The solutions given beneath can be followed for all types of HP printers / scanners. Although all the solutions shared below are easy to empathise and apply, you must follow the steps in the order as they accept been mentioned below.

A) Reset the HP Printer / Scanner to Ready the “Scanner Decorated” Trouble

If the “Scanner Decorated” error is caused due to insufficient power, then follow the steps given below to reset your HP product so that it tin can commencement performance commonly.

1. Switch on
   your HP printer / scanner, and then open its cover and
   take out the installed cartridge. In instance of inkjet printer remove the ink cartridges and in case of laser printer remove the toner cartridges.
   
2. While your printer is switched-on,
   pull out the ability cord
   from the
   backside of your printer, and then pull out the ability string from
   the wall socket.
   
3. If the
   USB cable and/or Ethernet cable
   is connected to your printer, and then
   remove
   them as well.
   
4. Expect
   for 2-3 minutes, then printing and hold the
   power button
   of your HP printer / scanner for
   up to 30 seconds. Doing this will completely remove any additional charge in your printer.
   
5. At present,
   connect the plug
   of your power cable direct
   to the wall socket. Don’t insert the power plug into whatever extension cord, surge protector, etc. Finally,
   connect the other end of the power cord
   with the printer.
   
6. Press the
   power button
   to restart your printer, then
   await
   for information technology to warm-upward and achieve the idle land.
   

Check if resetting your HP printer / scanner has resolved the “Scanner Decorated” error. If the error still persists, then try the next solution.

B) Run the “HP Print and Scan Dr.” Tool to Gear up the “Scanner Busy” Problem

If there is a mechanical problem with your HP scanner, then you should use the HP Print and Scan Dr. tool to identify this problem. This utility is provided by the HP to its customers for free and you tin download it from the HP support site. However, this HP tool is only available for Windows operating system users.

1. Download the HP Impress and Scan Doctor tool from the HP site, then install and run information technology on your computer. In the Welcome screen, click on the ‘Outset’ button.
   
2. Wait
   for the utility to search for the HP products connected to your computer.
   
3. In the listing of products displayed,
   choose the HP printer / scanner
   y’all want to check. Make certain that your HP product is switched-on, and then click on the ‘Next’ button to go along.
   
4. Wait
   equally the HP tool tries to connect with your HP printer.
   
5. Cull the ‘Prepare Scanning’ option to fix your scanning problems.
   
6. If y’all want to install the latest version of the software for your HP printer, then you lot can click on the ‘Get Installer’ button. Otherwise, click on the ‘Skip’ push button to continue with the fixing procedure.
   
7. Wait
   as the HP utility tries to find and fix the scanning problems in your HP printer / scanner.
   
8. Since, the device nosotros are using doesn’t have whatever scanning issues, all the options take a ‘Green Tick’ in forepart of them. If this HP utility finds whatever problem, then it would exist shown as a ‘Crimson Cantankerous’. You can click on the ‘Ruby Cross’ to view the details of the trouble. Otherwise, click on the ‘Exam Browse’ link to scan a test page.
   

If using the HP Print and Browse Dr. tool didn’t fix your “Scanner Busy” problem, then movement to the next solution.

C) Disable WIA Service to Ready the “Scanner Decorated” Problem

If you haven’t found any trouble with your HP printer / scanner, then maybe the problem is with the Windows Paradigm Conquering (WIA) service. Y’all should disable this service on your Windows operating organisation and information technology may resolve the “Scanner Busy” mistake in HP scanner.

1. In the search box, type ‘services’ and choose ‘Services’ from the search results.
   
2. In the Services list, locate and right click the ‘Windows Image Conquering (WIA)’ service and cull ‘Properties’ from the options.
   
3. In the Properties window, click on the ‘Stop’ button.
   
4. Wait
   for the ‘Windows Image Acquisition (WIA)’ service to stop.
   
5. In the Startup type field, click to choose ‘Disabled’ from the drop-down list.
   
6. Click on the ‘Utilize’, and so ‘OK’ button to finalize the changes.
   
7. Click on the ‘Close’ button to close the Services window.
   

That’s it, you should again try to scan pages with your HP printer / scanner and nearly probably the “Scanner Busy” problem will be fixed.

Now yous know how to fix “Scanner Busy” problem in HP printer / scanner. However, after following all the solutions given in a higher place you lot were unable to resolve “Scanner Busy” error, then y’all should visit the nearest HP service center of contact them through the HP support site.