Dc Unlocker 2 Clent Untuk Huawei E5577

******************** UPDATE 11 April, 2020 ***********************

DOES NOT WORK ON NEW DEVICES mail 2018

The above method does non piece of work with the New Firmware models like 21.333.64.01.284.

If you lot firmware version is 21.318.09.00.284 or lower, it volition work. Versions above this exercise not work. In that location is a unlike method for that.

=======================================

Hey !! Then I previousy wrote a review on the AIRTEL 4G HOTSPOT E5573CS-609 MODEL, you can cheque ithere. At the stop of the post I mentioned that this device can but exist Unlocked using a shot boot method. This is considering we need to Change the internal firmware to a generic Huawei Firmware instead of the Custome ane which Airtel ships with.

Now there are may many blogs out in that location where they will guide you lot to do the same, but they will not provide unabridged solution untill you lot pay them a small amount of Rs500/-

I Maganed to find this solution with a little assistance of those blogs and research on my own.

If you feel this mail has helped you, please similar information technology and re-blog it so that others can benefit.

If you wish to share this on any of your own blogs please do add together a link to this page.

I am providing the eitire solution below, for every one and I don’t desire money, however, if you need me to exercise this for y’all, then I will Charge 🙂 . Also If yous wish to donate to me, if y’all found this post usefull, yous can using paytm and scan the QR code at the stop of the postal service.

In the before models (E5573s), when you need to modify the firmware, there was a need to enter a code known as a device Flash lawmaking. This flash lawmaking was like shooting fish in a barrel to calculate for the Erstwhile models based on the IMEI number as the algorithm used was either Algo V1,Algo V2 or Algo V3.

However the latest model, E5573Cs, uses the Algo V4, which requires a code, called DataLock Code. This code cannot exist calculated using IMEI number easily. Also Airtel does non provide this Code at all.

Hence, to change the firmware, nosotros demand to Remove this code entirely. This DataLock Code is stored on a space chosen the NVRAM (Non -Volatile RAM), along with other information like your Device Serial Number, Device IMEI number, Wi-Fi default SSID, Wi-Fi Default Password.

Hence Using this method, volition besides delete all these other Data equally well. In the post I will Also show how to restore this data. All the same, please be informed, this post is t share the cognition, and all responsibleness of performing these steps is on you lot. Your device will loose its waranty and it cannot be restored easily. Hence, I will not be held responsible for any damage. Please Proceed at your own risk.

---

Now You will Need the Below List of Softwares, and so please download them all 1st.

Download:

New Google Drive Download link:

https://drive.google.com/open?id=0B6drvGxSTJEaZkFzX3dBWWM4WnM

New link for latest WebUI (addition of Stride iv):

https://drive.google.com/open?id=0B6drvGxSTJEaZEVUVEhFanFxMjg

Sometime 4Shared download links:

All the Beneath required Softwares will be bachelor in a unmarried null filehttp://www.4shared.com/nix/5Si4vafqce/Airtel_Huawei_E5573Cs-609_Unlo.html

• free-hex-editor-neo
• Huawei-HiLink-Drivers / Mobile Partner Drivers
• Balong_USB_Downloader_1.0.1.10
• E5573cs-323_usbloader
• E5573Cs-322TCPU-21.318.99.03.00_Firmware_Normal
• E5573Cs-931TCPU-21.318.05.00.00_Firmware_general / E5573Cs-609Update_21.318.09.00.00_Firmware_Universal
• E5573Cs_WEBUI-17.100.15.00.03_Firmware_universal
• DC-Unlocker (link :https://world wide web.dc-unlocker.com/downloads )

Method:

Please go on at your own adventure !!!! Delight USE Simply A WINDOWS 7 Machine. WINDOWS 8, viii.i and 10 will give y’all problems with drivers.

Step 1:
Start your Device past long pressng the button in the centre, and both led lights for network and battery will blink green. Connect your Device to the PC / Laptop and allow the drivers go installed. If the Autorun Option is bachelor, run it and install the softwares.

One time the Default Drivers are installed, run the Huawei-HiLink-Drivers and Mobile Partner Drivers and instal them as well.

Now open the Web UI in the browser (if it does not car open 192.168.i.1/html/home.html) Go to Settings (if prompted for ID / Laissez passer, enter
admin
in both), then get to device settings and brand a Note of the IMEI and Serial Number. This data will as well be present inside the Device behind the bombardment and on the Box you received the device in. We need this information to restore it later equally I said information technology will get errased in the process.

Step ii:
Now plow off your device, past long pressing the Center push, and remove the dorsum cover. Leave the Battery inside and Remove the 6 screws and open the front of the device.

Step 3:
Now we have to kick shot the device. For this you volition demand a wire or any metal which can be used to affect the Basis connectedness to the Boot loader on the lath, every bit shown in the beneath diagram. Keep both touched with i hand, and with the other connect the device to the PC / Laptop with USB. You should hear a Sound and you will meet some hardward is getting installed.

Step 4:
Now open Extract Balong_USB_Downloader_1.0.ane.10 and E5573cs-323_usbloader, both these in i folder. Run Balong and clikc on the Detect push button, it volition auto detect the COM Port and so clikc on the 3 dots nearly the Load push button –> selet USBLoader file which nosotros extracted and click on load.

The Progress bar at the bottom will load. allow information technology complete till the end, do not interupt information technology or disconnect the cable even if information technology freezes. In one case done again you will hear a sound and the router will restart and y’all will over again see some hardware installing.

Step v:
Now shut Balong, and open the file E5573Cs-322TCPU-21.318.99.03.00_Firmware_Normal.zip and execute the .exe within information technology. clikc on adjacent,allow it detect the device and it should beginning downloading and installing the Firmware in the Router.

Pace half-dozen:
Once done, wait for a few minutes for the device to restart and so open any ane of the files E5573Cs-609Update_21.318.09.00.00_Firmware_Universal.zippo / E5573Cs-931TCPU-21.318.05.00.00_Firmware_general.cypher (which ever works, if one doesn’t try the other) and run the exe again. again it volition download the new firmware and update information technology.

Step 7: At present that the firware is installed, you take to install the Web UI. Open the E5573Cs_WEBUI-17.100.xv.00.03_Firmware_universal.zip or E5573Cs_WEBUI_17.100.15.01.03_general.cipher (which ever works, if i doesn’t try the other) and run the exe inside it. Again it will detect the Device and install the WEB UI this time, once done, the device will restart and in a while your brouser will auto open with the Link 192.168.8.one/html/home.html.

Brand sure to Add together all your cyberspace profiles and APN’due south here as this is the Huawei WebUI and it will allow y’all to add any service provider APN profile. If you proceed after this without calculation the APN Profiles, you will non exist abe to add together them later as the default Thought and Airtel WebUI’south lock the APN and you cannot edit it. Optionally you can besides use the Huawei Link Android App to add together the APN profiles later at whatever time. To add together APN profiles get to Settings –> Prifile Management and add together the APN there and then click on LOAD APN for which ever Network Provider profile yous desire.

CONGRATULATIONS!!! your device is at present UNLOCKED… 🙂

However, now that you wiped the NVRAM, your IMEI and Serial Number is wiped off and such a device is illegal to operate in whatever country. If you attempt to access the net with a device with no IMEI, your operator could disconnect your connection immidiately. Hence, Now we need to restore the IMEI and Series number y’all got in step 1.

To do this, follow the Below Steps.

Pace 1: Turn your Device off, wait for a while, and plow it on.

Step two: Open dc-unlocker and run it. In Select manufacturer, select Huawei modems and so click on the magnify drinking glass to search.

Yous may get an mistake similar below.

===================================================================

DC – Unlocker 2 Client 1.00.1277

Detecting modem :

pick :
manufacturer – Huawei modems
model – Car observe (recommended)

Access denied! Check firewall, antivirus, try to launch software every bit Ambassador!

===================================================================

===================================================================

Ignore it and keep clicking search till it detectes the device and gives information similar in the screen shot

Here you will run into that IMEI is fix to 000000000000000 and Serial Number is wrong.

Step 3: Now to Fix the IMEI Number, run re-create the Beneath control in dc-unlocker, below the ========  and press enter on keyboard. you should get a render value OK.

AT^CIMEI=”Replace with your IMEI number”

Step iv: At present to Fix Series Number we take to Generate the Hash Hex Code for your serial number. For this install the software free-hex-editor-neo.exe.

At present open it and click on File –> New File.

Enter your Serial Number equally you got it (Case Sensitive) on the Right side, and on the left the Hex Code will automobile generate.

Pace 5:
Now run the Beneath Commany in DC-Unlocker,and information technology should return OK.

AT^NVWR=6,xvi,Your Hex lawmaking with SPACES

example: AT^NVWR=six,sixteen,35 4c 32 37 53 31 36 39 39 33 30 30 31 33 32 39

P.S: Instead of this Use AT^SN=”16digit serial number”

Step 6: If you want to set up a datalock lawmaking use the control, and you tin ready whatever 8 digit valyue you lot similar.

AT^DATALOCK=”12345678″

Now If yous again click on the search push button on dc-unlocker, information technology will re-populate the details and y’all will run into the correct IMEI and Serial Number.

Footstep 7:
If y’all would similar to rename your Wi-Fi SSID and password, open up the new Browser WEB UI using http://192.168.8.1/html/habitation.html (you lot will have to plough you lot device on and off subsequently using DC-Unlocker)  and go to settings.

NOW YOUR DEVICE IS UNLOCKED AND READY TO Employ!!!!

You lot CAN USE THE SAME METHOD FOR IDEA HOTSPOT OR ANY DEVICE WHICH HAS MODEL NUMBER E5573CS

***************** UPDATE 01-Feb-2017***************

With the Universal Huawei WebUI, there was i drawback, which was you lot could not lock on to a specific Network Type for 4G. it was possible for 2G / 3G or Auto, but not 4G. 4G would simply work under auto, and there was no way to lock on only to 4G automatically.

With the Below Details, this issue is resolved. You tin can Cull to use either the Huawei Universal WebUI or the Airtel WebUI or the Idea WebUI.

I take uploaded in a higher place, in the beginning, a new link for WebUI’due south which accept this feature. We can use the original Airtel / Idea WebUIs itself. And then in one case your washed following the steps I mentioned above for unlocking, just open up either E5573CS_WEBUI-17.100.15.01.284_India_Airtel.zip or Huawei_E5573cs-609_WEBUI-17.100.15.01.356_India_Idea.zip. execute the programme, and install the new WebUI.

If information technology gives an error, attempt removing the battery putting it dorsum. then starting the device, and and then running the program.

Likewise for some reason the software runsin standard arabic, so everything is from Right to Left (only when installing) then YES is on the Right Button.

Below is the screenshot for your referenece. You tin can use any WebUI (Idea or Airtel) equally both will work on both devices. 🙂

***** Update 3-March-2018******

Use below code to update the MAC address. Brand certain you are updating your own MAC accost. This is optional.

AT^PHYNUM=MACWLAN,7AFEE22111E4

Thanks tovenu srinivasan for this udpate on MAC address

All Details to this post are perfect and updated.

PS:
I know that looking at this post, anyone tin can unlock this device, and some people may think of utilizing the knowledge and tools from this mail service to take money from people who are unaware of how to do this. I cannot stop them, nonetheless I take a request to all, please similar this post, re-weblog and up-rate it so that it gets more visibility.

I come across someone has made a nice video on how to unlock with all detailed Steps.

Link to Device Unlock video:https://www.youtube.com/lookout?v=sOfCTw4wpyU&app=desktop

Link to Update IMEI  / Serial:https://www.youtube.com/watch?v=TgMHXTgJ4xY

link to Device Softwares by this user:https://goo.gl/PPpTdX

Link to purchase screwdriver:https://world wide web.amazon.in/Taparia-PST6-Precision-Spiral-Driver/dp/B00DDTNWX2/ref=sr_1_8?ie=UTF8&qid=1519389156&sr=8-viii&keywords=torx+screw

******************** UPDATE eleven April, 2020 ***********************

The in a higher place method does not piece of work with the New Firmware models like 21.333.64.01.284.

If you firmware version is 21.318.09.00.284 or lower, information technology will piece of work. Versions above this do not work. There is a different method for that.

If you wish to donate to me for helping y’all in unlocking the device, you can scan the below Paytm QRcode and donate any corporeality you wish:

Donations Received. Cheers very much…