Cara Mengatasi Printer Brother J200 Close Ink Cover

Cara Mengatasi Printer Brother J200 Close Ink Cover

The message “Unable to Impress 43” will appear on the display for one of the following reasons:

     i.  A foreign object, such as a paper clip or ripped piece of paper, is stuck in the machine;

     ii.  Mechanical malfunction.

To attempt to clear the error, continue to
pace 1.

1.  Before get-go this troubleshooting, it is recommended to transfer your faxes to another fax automobile then you won’t lose any of import messages.  Any faxes received while the error message is on the display will automatically go into the machine’south memory due to the production’s inability to impress.  If there are faxes in memory, you can transfer them to another fax machine and then they are not lost.

     – If you lot don’t want to transfer faxes, go to
step three.

     – If you want to confirm and transfer received faxes in retentiveness, go to
step 2.

two.  Transferring stored faxes to some other machine.


note icon
To transfer data from your fax machine to some other fax machine, yous must have already programmed the Station ID in your automobile
prior
to getting the “Unable to Print 43” mistake bulletin.  If you did not already have your Station ID programmed into the car before getting the error, you will not be able to transfer faxes in retentiveness.  Continue tofootstep three
.


a.  Press
Stop/Exit
to temporarily interrupt the error message.

     b.  Press
Carte du jour.

     c.  Printing ▲ or ▼ to select
Service.  Press
OK.

Read:  3d Printer Build Logo After Effects Template

     d.  Printing ▲ or ▼ to select
Data Transfer.  Press
OK.

     e.  Printing ▲ or ▼ to select
Fax Transfer.  Printing
OK

.

          – If “No Information” appears at that place are no faxes in memory to transfer.  PrintingEnd/Exit, and and so go on to
step three.

          – If there
are
faxes in memory, the display will prompt to enter a fax number.  Enter the fax number including the 1 plus the expanse code, then become to
step f.


f.  PressBlackness Start.  The stored faxes will transfer to that number.  Go on tofootstep 3.


3.

Using both hands, utilize the finger holds on each side of the machine to life the scanner embrace into the open position.

Open Scanner Cover

     – Practice y’all encounter the scanner cover support arm located on the left side of the machine?

          – If
aye, get to
step four.

          – If
no, verify y’all have opened the scanner cover (as in the image above).  If the document cover was opened, you lot won’t see the green scanner cover back up.  Close the document cover and go dorsum topace three
to open up the scanner cover.

iv.  Carefully bank check the left (two) and right (3) mitt corners and the center within the machine and remove whatsoever paper scraps that may be jammed.

Check for Paper Scraps

five.  Using your hand, move the print caput from left to correct, checking carefully for any paper scraps stuck under the print head.  Remove any if plant.

note icon
If the impress head is in the right-hand corner, press and hold
Terminate/Exit

for at to the lowest degree 5 seconds until the print head moves to the middle.  This will let y’all to bank check the right corner within the machine for any paper scraps.

Read:  Cara Mengatasi Printer Canon G2000 Error 5b00

6.  Leave the scanner cover
open
and turn the machine around so you are looking at the back of the machine.

7.  Open the Jam Clear Cover (1) on the back of the car.


Open Jam Clear Cover

eight.  Check inside for whatever foreign objects or jammed paper.  Remove it institute.

9.  Shut the Jam Clear Cover, and so turn the machine back effectually to the forepart.

10.  Elevator the flat-bed scanner cover to release the lock (ane), then gently push the scanner cover back up downwards (2) and close the scanner comprehend (three) using both easily.

Close Scanner Cover

     – If “Unable to Print 43” is still on the display, go to
pace 11.

     – If “Unable to Print 43” has cleared, go to
step 12.

eleven.  Unplug the motorcar from the power outlet for approximately one-minute, so plug it dorsum in.

     – If “Unable to Impress 43” withal on the display, go to
step 13.

     – If “Unable to Print 43” has cleared, go to
step 12.

12.  Print a Print Quality Check Sheet (PQCS).

     a.  Printing
Menu.

     b.  Press ▲ or ▼ to select
Ink.  Press
OK.

     c.  Press ▲ or ▼ to select
Exam Print.  Press
OK.

     d.  Printing ▲ or ▼ to select
Impress Quality.  Press
OK.

     due east.  Press
Color Get-go.  A PQCS will print.

          – If the PQCS print successfully, your automobile is working properly.  The issue has been resolved.

          – If the PQCS doesn’t print considering “Unable to Print 43” reappears
and
yous take
not
cycled the power, go back to
step 11.

Read:  Where Is the Printer Located Postal Code

          – If the PQCS doesn’t impress because “Unable to Print 43” reappears
and
yous
take
cycled the power, proceed to
step 13.

13.  Your machine will require service.  1000o to
Warranty and Service Options.



Warranty and Service Options
:


Your machine has a 1-year limited commutation warranty.  Bank check the warranty status of your machine by clicking on the
Machine Warranty Computer.




If in warranty, contact

Blood brother Customer Support

or locate a

Brother Authorized Service Center

to schedule product replacement or repair.


If out of warranty, locate a

Blood brother Authorized Service Centre
.  Repair fees might employ for out-of-warranty products.

Cara Mengatasi Printer Brother J200 Close Ink Cover

You May Also Like