Can’t Install Remanufactured Ink Firmware Says My Printer Is Updated Already
Is your HP printer not recognizing your new ink or toner cartridges?
This kind of problem is fairly common among HP users effectually the world. It mostly happens when you lot’re using refilled, uniform, or remanufactured cartridges.
HP 902XL Ink Cartridges
HP 950XL 951XL Ink Cartridge
HP 564XL Ink Cartridge
After replacing your empty ink cartridges with new ones, you may suddenly encounter any of these fault letters or displays:
-
“
Toner is non uniform
“
-
“
Printer Cartridge Not Detected
“
-
Low ink or toner levels “HP cartridges locked” or “cartridge protection enabled.
“
-
“
No Cartridge Installed
“
Why are the Ink Cartridges non detected?
If yous receive any of the above error messages, and then your printer’s ink cartridges are not detected. Let’s take a look at some of the possible causes of why information technology happens and the troubleshooting steps you lot can follow to resolve the issue.
ane. Printer Internal Memory Needs Resetting
Ordinarily, your HP printer can accurately detect total ink levels or new ink cartridges. In some instances, still, information technology fails to do so primarily because its internal memory is full. When this happens, the printer will still “retrieve” that it’s using an one-time or empty cartridge even though you lot already replaced it with a new one. You can resolve this trouble by resetting your HP printer’s internal memory:
- Remove the new ink cartridge and reload the old ink cartridge back into the printer.
- Wait for about 10 minutes earlier you proceed to the side by side step.
- Remove the old ink cartridge and install the new ink cartridge again.
Your HP printer should be able to recognize your new ink cartridges by at present. If information technology yet doesn’t, endeavour these
alternative steps
instead:
- Remove the new ink cartridge from the printer
- Plow off your HP printer and detach its power cord for 10 minutes
- Reconnect the power cord but don’t plow on the power button just yet
- Reload the new ink cartridge back into the printer
two. Metallic Contacts crave Cleaning
HP ink cartridges characteristic numerous metal contacts responsible for transmitting electronic signals to the printer. This link allows the printer to instruct the cartridge to release ink to apply it to the newspaper during printing.
When metal contacts go muddied or damaged, it disrupts the flow of communication between the printer and ink cartridge resulting in HP ink cartridge, non working errors. Make certain that your metal contacts are clean with these steps:
- Plough off your HP printer and unplug its power cord.
- Remove the new cartridge from the printer.
- Check the metal contacts. They are usually found on the side or back and resemble a flat slice of copper, metal, or sometimes circuit board.
- Check the printer railroad vehicle for the connectedness bespeak. It’s the part that the metal contacts touch when they are installed in the printer.
- Using a make clean, lint-free, and dry textile, gently wipe the metallic contacts and the connection point.
- Make certain that all dirt and residual are wiped clean.
- Reload the new ink cartridge back into the printer
- Turn on the printer and exercise a test print to meet if the ink cartridge gets detected.
iii. Protective Tape or Strip aren’t removed
Did you forget to take out the protective covering earlier installing the new toner or ink cartridge into the printer? If yous did, and then the printer won’t be able to recognize the cartridge. Make sure that the protective taping is removed to prevent printing errors from arising.
4. Disable HP Cartridge protection
HP has integrated its printers with a firmware that helps ensure smooth performance and functionality. Sometimes though, this same firmware can be a source of headache, especially if you’re using
compatible or remanufactured HP ink cartridges
. It prevents these types of cartridges from working by putting a “cartridge protection lock” on the printer.
Remanufactured ink cartridges offer plenty of benefits, especially on the economic side, so if you’re planning to use them, it would be best to
disable HP cartridge protection
beginning.
-
Go to
Command Panel
and select
Printers and Devices - Locate and right-click on your printer on the list
- Select properties followed past the software tab
- Un-tick “automatically update” your printer
5. Wrong / malfunctioned ink cartridges
There’s also a gamble that yous purchased faulty or defective ink or toner cartridges. It could exist the reason why the HP ink cartridge isn’t working. Endeavor
contacting HP
if you lot receive problematic ink cartridges. If you purchase compatible or remanufactured ink cartridges, make sure it’s from a legit and trustworthy source similar
YoyoInk
.
6. Improper Cartridge Installation
Frequently Asked Questions
If your HP printer appears offline, information technology’southward likely considering it can’t communicate properly with your PC. That means you won’t be able to impress unless you get your printer back online. Here are some things you tin can practice to fix the issue.
- Brand sure your HP printer is turned on. Check the ability cord and see to it that it’s properly attached to a power supply. Make sure that the printer is also connected to the same Wi-Fi network every bit your PC. Your printer has a built-in card that volition show yous which network information technology’s continued with, or refer to the product transmission for additional info.
- Check and make certain that your printer isn’t in “Use Printer Offline” mode. Go to
Start
>
Settings
>
Devices
>
Printers & scanners. Find and select your printer and so go to >
Open queue. Under
Printer, make certain that
Use Printer Offline
isn’t selected.
Resetting HP printers is near the same beyond all models, which means you can follow the same procedure to reset any HP printer model. Then whether you lot’re using an HP Inkjet Ink Advantage or HP Deskjet, you lot can follow this short printer reset guide. It’due south a simple process, and it can be a potential solution if your encounter a problem with your printer. And then let’s showtime:
- Plugin the printer’southward power cord and printing the ability button to turn on the auto
- Expect for the lights to turn on to ostend that the HP printer is ready.
- Long press the ability push button followed by the cancel button for at least ten seconds.
- Release the power push and then the abolish button
- Wait for the printer to answer. You will hear the printer trying to print.
- You will run into a red lite blinking notifying that at that place is no paper in the printer. Stop the notification past pressing the cancel button in one case.
- Once the red button stops press, this means that you have successfully reset your HP printer.
If supported by your HP printer, yous tin print wirelessly with HP mobile printing solutions from laptops, tablets, or smartphones. You can choose from numerous mobile press solutions for dwelling or concern environments on popular operating systems, including Android, Chrome, iOS, OS X, and Windows. So how practise you lot connect your mobile device to your printer? There are several ways to go about it, and it will depend on the printer’due south capability and location.
Wi-Fi:
Take advantage of your laptop, phone, or tablet’south wireless capability to impress to a printer about you that’s connected to the same Wi-Fi network.
Wireless Direct or Wi-Fi Direct:
You tin can utilize this to connect directly to a printer near you, just like with a Wi-Fi network.
Cloud / Internet
– Cloud or internet connection lets you lot print to an HP printer on another network or to a printer in a remote location.
