Can You Use Translation Patches on Psp With Custom Firmware

Can You Use Translation Patches on Psp With Custom Firmware

The PSP Custom Firmware six.61-Pro-C2 will work on all PSP models from the original PSP to the PSP Go and even the E1000, all yous need is to be running the official 6.60 or 6.61 firmware to install and use this custom firmware.

Note: On the 15/01/2015 Sony released PSP firmware 6.61, some three and a half years later on the last 6.60 update. Information technology’s of no do good to y’all updating to vi.61 after all this fourth dimension, however the custom firmware has now been updated to support six.61. So yous can now follow this guide if yous happen to take updated to 6.61.


Why would i desire to install Custom Firmware on my PSP?

When custom firmware is on your PSP yous tin use emulators, homebrew applications and even backup your games to the memory stick. This allows y’all to easily carry around more than than i game, and helps to save your PSP’southward bombardment equally it does not need to power the UMD bulldoze when playing games. You lot tin too catechumen your old PS1 games and play them your PSP. All PS1 games are supported, non just games on the PSN. You lot tin can also add new features to your PSP via kernel mode background plugins, for example the ability to take screenshots in games.

Something to note is that you tin just permanently install this firmware on a PSP k or a PSP 2000 that is non an 88 v3 version. Nevertheless its very piece of cake to re load the custom firmware on a 88V3 PSP 2000, PSP 3000, PSP Go or E1000. I volition cover finding out your PSP version later in this guide, all you need to know for now is that if yous own a PSP you tin follow this guide and get homebrew applications running on your PSP.

If the firmware is permanently installed information technology means your PSP volition boot directly in to the custom firmware when powered on, if not information technology means you volition have to enable it again by launching a unproblematic app. This however only needs doing from a common cold kick, if you exit the PSP in standby like virtually people practise (you probably do this without realising) then you will non need to enable it.


1. Updating your PSP to 6.lx (Skip this if you are on half dozen.61)

To begin
Download the Official PSP 6.60 firmware
and update your PSP.

To update the PSP simply extract the PSP binder from the 6.60 update RAR file and move it to your PSP’s retention stick.

Every bit you tin can see below the PSPGAMEUPDATE folder contains the EBOOT.PBP update.

Can You Use Translation Patches on Psp With Custom Firmware

Now on your PSP go to Game > Memory stick then launch the half dozen.60 update, follow the instructions to install the update:

psp-6.60-ofw-install.jpg



2. Installing the custom firmware:

Now
Download the PSP half-dozen.threescore PRO-C2 custom firmware
if yous are on six.00
If y’all are on half-dozen.61
Download the PSP 6.61 PRO-C2 custom firmware.

Inside this RAR file you lot will find 3x folders that you lot need:

  • PROUPDATE
  • FastRecovery
  • CIPL_Flasher

Copy the PROUPDATE to the PSP > Game folder on the memory bill of fare:

psp-6-60-cfw-install-files.png

Regardless of your PSP model you can safely run the PROUPDATE application:

psp-6.60-cfw-install.jpg

After running the update press “X” and the custom firmware will install, all been well your PSP will now be running custom firmware

until you ability it off
.

That’s information technology, information technology’due south a simple every bit that your PSP is at present running custom firmware and tin can take advantage of all the additional abilities of a hacked PSP, however read on for information on how to permanently flash the custom firmware if supported past your PSP, or how to enable the custom firmware over again if you lot power your PSP off.


3. Tin i permanently flash the custom firmware to my PSP?

Now your PSP can run unsigned code nosotros will observe out if you lot can permanently flash the custom firmware to your PSP.

Download
PSP Ident

Unzip and copy the program to your PSP > Game folder like yous did with the custom firmware installer, so load PSP Ident upwardly on your PSP:

pspident.jpg

You lot will be presented with lots of data about your PSP, the screenshot below is from my PSP 1000:

pspident-info.jpg

We can run into that my PSP is a

1
.2 the 1 been a PSP 1000 and information technology has a 79 V3 motherboard, which is capable of having custom firmware permanently flashed to information technology.

Think you tin only permanently install this firmware on a PSP 1000 or a PSP 2000

that is non an 88 v3 version.


4. If you can permanently flash custom firmware read on, if not go to v.

Copy the CIPL_Flasher from the Pro C2 firmware you downloaded to the PSP > Game folder on the retentivity card, then run the application from your PSP to make the custom firmware permanent.

psp-cipl-flasher.jpg

You tin now ability your PSP off and still have custom firmware when you power it on again, that’s is your PSP is permanently hacked. The simply matter that will remove this is by upgrading to a newer official firmware, which at the time of writing does non exist. As its been over two years since the last official PSP update was released its unlikely any more arrangement updates volition be released by Sony.


five. If you can non permanently wink custom firmware:

For PSP’s that tin can not permanently install custom firmware copy the FastRecovery folders to the PSPGame binder memory bill of fare. If you ever power your PSP off simply run this application again to enable custom firmware. The custom firmware will stick until you totally power your PSP off. As mentioned earlier when you ordinarily press the power button the PSP will sleep, to totally ability the PSP off you demand to hold the power push downwards for v seconds.

psp-fast-recovery.jpg


six. Terminate effect:

psp-6.60-pro-c2.jpg

I have personally tested and made this firmware permanent on my PSP 1000 and a friends PSP 2000 (Non 88v3). If yous are unsure about anything just utilise the PROUPDATE and enjoy custom firmware. If y’all e’er power your PSP off fully just use the fast recovery program, there is piddling risk to your PSP doing this.

Y’all will be able to play whatsoever game released to appointment on either vi.60 or 6.61, you will as well be able to connect to the PSN and buy stuff. The best of both worlds I remember y’all volition agree
:)

I want some Emulators:


Here is a pack of emulators I have put together, to the best of my cognition all emulators are the latest versions as of xxx/12/14. Yous will need to provide the BIOS and Roms for the emulators where necessary:
Download PSP Emulator Pack – thirty/12/14

Can You Use Translation Patches on Psp With Custom Firmware

Read:  Use Usbtiny as Printrbot Usb Install Firmware

Check Also

Asus Me Firmware Update Driver Tool Failed

Asus Me Firmware Update Driver Tool Failed

Asus Me Firmware Update Driver Tool Failed 11-xi-201710:18 PM #xi ROG Enthusiast Array reupens PC …