Can You Upgrade Router Firmware With Wireless Connection

Can You Upgrade Router Firmware With Wireless Connection

Download Article

Download Article

Updating your router firmware can help amend connectivity and proceed your router secure. It is always recommended to install the latest available updates to keep your network safety and efficient.

Virtually routers have a born update checker, which may or may not perform the unabridged process automatically. If yous’re using an Apple AirPort router, you lot tin can use the Aerodrome Utility program to cheque for updates.

  1. 1

    Cheque the physical router for the address.
    Y’all tin access your router by entering its IP address into your web browser.

    Nearly routers have this IP accost printed on the sticker affixed to the bottom.
    If your router does not, or you don’t have access to the concrete router, follow these instructions to find it.

  2. 2

    Open the Showtime carte du jour or screen and blazon
    “network condition.”

    This volition open the “View network condition and tasks” window.


  3. 3

    Click the proper noun of your current connection in the height-correct corner.
    Information technology will take an icon indicating the type of connection you lot are using (Wi-Fi, Ethernet, etc.).

    • Brand sure you’re connected to the router’s network.
  4. four

    Click the “Details” button in the new window that appears.
    This will display a list of entries.

  5. v

    Notice the
    IPv4 Default Gateway

    The IP accost listed here is your router’south IP accost.

    Make a annotation of information technology and skip down to the
    Installing Router Updates
    section below.

  6. Advertizement

  1. i

    Check your concrete router for the IP address.
    You’ll access your router’s configuration folio by inbound its IP address into a web browser on your computer.
    Most routers take the IP address printed on a sticker on the lesser.
    If your router doesn’t take this sticker, or you can’t physically admission the router, follow the instructions in this method.

  2. ii

    Click the Apple menu and select “Organization Preferences.”
    This volition open a new System Preferences window.

  3. iii

    Click the “Network” button.
    This volition display all of your network connections.

  4. 4

    Select your active connectedness in the left frame.
    It will have a green indicator next to information technology, and will say “Connected” underneath.

    • Make sure y’all’re connected to the router’southward network.
  5. 5

    Click the “Advanced” button.
    This volition open a new window.

  6. 6

    Click the “TCP/IP” tab and look for the “Router” entry.
    This is the IP address for your router.

  7. Advertizement

Read:  Do I Need to Update Ssd Firmware or Leave It
  1. i

    Connect to the router via Ethernet.
    Some routers are setup to not allow access to the configuration folio if you are connected via Wi-Fi. Connecting via Ethernet will assistance ensure that you can properly access the configuration tools.

  2. 2

    Enter your router’due south IP address into a web browser’s accost bar.
    Yous can find this address past following the methods outlined to a higher place.

    • Enter the accost equally if you were visiting a webpage.
  3. 3

    Enter your login information.
    When you lot try to open the configuration page, you’ll be prompted to enter your router login information. If you don’t accept this data saved, y’all can endeavour some of the mutual defaults:

    • Endeavor leaving both fields blank. Many routers don’t have whatever username or password required.
    • Try entering “admin” as the username, then leave the password blank. If that doesn’t work, enter “admin” equally the password also.
    • Expect upward your router make and model at This will display the default login information.
    • If the default login information doesn’t work, and you can’t figure out how to log in, y’all tin can reset the router by pressing and belongings the physical Reset button on the back. This will erase all of your router’s settings, mayhap disrupting your wireless network if you changed any default settings for it. You tin can then use the default login.
  4. iv

    Open the “Firmware,” “Router Upgrade,” or “Update” page.
    The name of this page will be different for every different router manufacturer. The location varies, but y’all tin usually discover it in the “Administration,” “Utilities,” or “Maintenance” section.

  5. v

    Click the “Check” push button to see if updates are available.
    Many routers take a button that will cheque to see if a new version of the router’s firmware is available.

  6. 6

    Download the latest firmware files if presented with a link.
    Depending on the router, yous may exist provided a link to the latest firmware version, or the router may even be able to download it on its own.

  7. 7

    Visit the manufacturer’s support site if no link is given.
    If there is a newer version of the firmware bachelor, merely no links are given, you’ll need to download the firmware from the manufacturer. You tin get these files from the Support sections of these sites.

    • Perform a web search to find the back up site. For instance, searching for “Netgear support” volition get you the link.
  8. 8

    Enter your router’south model into the support site’southward search.
    You can find your router model number at the top of the configuration page. Enter this model number into the search on the manufacturer’due south website.

  9. ix

    Observe the latest firmware files.
    Depending on the router, there may be a single firmware files, many unlike ones, or none at all. Download the latest version, either past date or by number. The file volition usually download in ZIP format.

    • Make sure you don’t download a version before than the one yous’re using. You lot can run across what version you’re using on your router’south firmware update configuration page.
  10. 10

    Extract the Nix file.
    Subsequently the firmware file has finished downloading, double-click the downloaded ZIP file to open it, then click “Extract” to excerpt the contents. This will usually give you one file with an unfamiliar extension.

  11. 11

    Upload the file to your router.
    Back in your router’s firmware update page, click the “Choose File” button and navigate to your newly-extracted file. Select information technology and so click the “Upload” button in the router configuration folio.

  12. 12

    Wait while the update is practical.
    Once the file is uploaded, the firmware update process will brainstorm. You’ll typically see a progress bar, and the update process may take 3-5 minutes. Your router will likely reset afterwards, which will disconnect you lot from the network for a few moments.

  13. 13

    Reset your router if the update fails.
    If the firmware update doesn’t work, and y’all can no longer connect to the router, y’all can manually reset it and endeavor once again. Press and hold the Reset push button on the dorsum of the router for xxx seconds to reset it to factory defaults. You’ll need to reconfigure your network if you made any changes to the default settings previously.

  14. Advertisement

  1. ane

    Open the AirPort Utility program in your Utilities folder.
    This plan allows you to change your Drome router’s settings. You tin detect the Utilities folder in your Applications binder.

    • If you’re using an iOS device, y’all tin download the Airdrome Utility from the App Store.
    • The Drome Utility is only available on Mac OS 10 and iOS devices.
  2. 2

    Click your base station and enter your password.
    The base station icon may have a red badge number indicating that an update is available, simply this may not announced until after you’ve entered your password.

  3. 3

    Click the “Update” button to download and install the update.


    This button just appears if an update is bachelor. Click “Keep” when prompted to ostend.

  4. 4

    Look for the router to update.
    This may have several minutes to complete. You will be disconnected from the network for a brusque time during the update process.

  5. Advertizement

Add together New Question

  • Question

    Do I need to update my router’s firmware?

    Luigi Oppido

    Luigi Oppido is the Owner and Operator of Pleasure Point Computers in Santa Cruz, California. Luigi has over 25 years of feel in full general computer repair, information recovery, virus removal, and upgrades. He is also the host of the Computer Man Show! broadcasted on KSQD covering central California for over ii years.

    Luigi Oppido

    Computer & Tech Specialist

    Good Answer

  • Question

    Do I have to inform my internet service company?

    Joseph Coscia

    Joseph Coscia

    Community Reply

    You commonly shouldn’t take to, unless it’s their router and something went incorrect with the update.

  • Question

    How do I update my WiFi?

    Allan Cramer

    Allan Cramer

    Community Answer

    Access your router settings by typing 192.168.1.i or into your web browser’due south address bar. Provided that y’all have the admin username/password to login to the router (usually on a sticker on the router, or typically the admin/password will work), there will most likely accept a notification on the kickoff screen letting you know that an update is available when you access the router.

  • Question

    How do I test and confirm that the firmware update was successful?

    Allan Cramer

    Allan Cramer

    Community Answer

    Typically, if your router is yet functioning every bit it was prior to the update, and then it was successful.

Inquire a Question

200 characters left

Include your e-mail address to get a message when this question is answered.



  • Download your internet provider’southward app for firmware update reminders.


  • Having firmware that’s not updated tin make you susceptible to firewall attacks.


Nearly This Article

Article Summary

i. Connect to the router via Ethernet.
2. Go to the router’s IP accost into a web browser.
3. Log in as an admin.
4. Go to the
5. Check for an update.
6. Download the latest firmware if prompted.
7. Extract the firmware file.
viii. Upload the file to your router.

Did this summary help you lot?

Thanks to all authors for creating a page that has been read 502,905 times.

Is this article upward to appointment?

Can You Upgrade Router Firmware With Wireless Connection

Check Also

Cara Flash Advan Hammer R3d

Cara Flash Advan Hammer R3d

Cara Flash Advan Hammer R3d Firmware Advan Hammer R3D (Sukses) ´╗┐Assalamu’alaikumSelamat Siang Oke Berjumpa Pun …