Brother Printer Prints but Won T Scan

Brother Printer Prints but Won T Scan



Download Article



Download Article

If your documents are coming out of a Brother printer with streaks and smudges, don’t worry! You don’t have to recall most replacing it just however. A uncomplicated cleaning can assist get your printer in like-new condition. Often, all y’all demand to practice is run a cleaning wheel. However, if in that location is a lot of stale ink in the printer, you may need to unclog the print head nozzles. Finally, clean the rollers for streak-gratis print jobs.

  1. 1

    Select the Ink option on the screen of your printer.
    If there is an Ink key on your printer, press it. If non, get to Menu and use the pointer and OK buttons to select Ink. For a touchscreen printer, either select Ink on the screen, or look for a square symbol with blackness, yellow, blueish, and magenta lines. This is the Ink Indicator.
    [1]

    • You can clean either the black ink, the color ink, or both.
  2. 2

    Select Cleaning to run a cleaning bike.
    This is the easiest way to clean the printer if something seems off. The printer will accept a few minutes to make clean old ink out of the print head, resulting in a cleaner print.
    [2]

    • If yous notice that your print jobs are coming out smudged or sloppy-looking, a cleaning wheel might take care of the problem.

    Ad

  3. three

    Leave the printer alone while the cleaning cycle is in progress.
    The cleaning cycle takes a few minutes and you won’t be able to impress anything or select other options on the menu. Don’t unplug the printer while the bicycle is running.
    [iii]

    • Once the cleaning is done, the printer volition automatically go back to the home screen, gear up to print.
  4. 4

    Examination print a one-page document.
    To see if the cleaning worked, try printing a single page. Bank check it for smudges. Make sure to print something in color if yous cleaned the colour ink or in black and white if you cleaned the black ink.
    [4]

    • If the printing notwithstanding looks off, y’all may have to run another cleaning cycle or unclog the print head nozzles.
  5. 5

    Sew together to four cleaning cycles in a row.
    Sometimes, you will need to run more one cleaning cycle to get the all-time results. However, try not to run more than 4 cycles in a row, equally the procedure tin can really commencement to describe ink out of the cartridges, making the cleaning less constructive and wasting expensive ink.
    [5]

    • If the printing still doesn’t look right after several cleaning cycles, try press 10 pages to see if this clears the nozzles.

    Advert

  1. i

    Kickoff a cleaning wheel and open the top of the printer.
    Use the carte du jour on screen to beginning a cleaning cycle. Open the entire meridian of the printer, not merely the scanner. The whole top should elevator open with no resistance.
    [6]

    • You lot will encounter the impress head moving dorsum and forth when you lot open the printer.
  2. two

    Unplug the printer when the impress head moves all the way to the left.
    The print head is difficult to clean when it is in its default position on the right side of the printer, only the printer needs to exist off earlier you start cleaning it. Wait until the impress head moves over and then unplug the printer.

    • The printhead is the square piece of the printer that you lot run into moving when you open the top of the printer.
  3. iii

    Place a piece of blotting paper under the impress head.
    A newspaper towel works well because it can absorb the cleaning fluid and extra ink. Fold the paper towel into a long strip that will fit over the print caput rail, and then slide the head over it.
    [7]

    • The print head doesn’t need to be all the mode in the center of the printer, only onto the paper towel.
  4. iv

    Remove the ink cartridges from the printer.
    This will expose the nozzles that take the ink from the cartridge and feed information technology into the impress caput. The bottom set of nozzles are the ones that need to be cleaned.
    [viii]

    • To save the ink cartridges, wrap them in cling film.
  5. 5

    Utilise a syringe to inject iv millilitres (0.14  fl oz) of water into the nozzle.
    You can buy plastic tubing at hardware stores and cut information technology to effectually 3–iv inches (7.6–ten.2 cm) using scissors. Purchase some in a width slightly larger than the size of the nozzle. Employ a brusque length of plastic tubing to connect the end of the syringe to the nozzle. Then, printing gently to slowly inject a pocket-sized amount of distilled water into the nozzle. Using water that is not distilled tin can clog the print head even more with minerals. This will flush out any remaining ink. Let the water soak for 5 minutes.
    [nine]

    • You can too buy cleaning fluids specifically for printers online.
    • If you can’t inject any fluid, y’all may accept to replace your printer.
  6. half dozen

    Return the impress caput to the right and put the cartridges back.
    Remove the paper towel and put the print head back in its “parked” position at the right side of the printer. Put the ink cartridges back in the printer. Then, plug in the printer and run a cleaning bicycle.
    [ten]

    • The paper towel volition be full of ink. Be careful when you are removing information technology from the printer, and article of clothing rubber gloves if you desire to protect your hands.
    • Once the printer is done priming the heads and running the cleaning wheel, yous can print out a examination document. Print a document with both color and black and white elements to be certain all of the nozzles were cleaned. Impress a minor paradigm that takes upward about ane/four of the folio if you don’t want to waste too much ink.

    Advertizing

Read:  Hp Printer Rollers Won T Grab Paper
  1. ane

    Turn the printer off and unplug it.
    The printer needs to be off before you kickoff cleaning the rollers. Unplugging information technology ensures at that place is no power flowing to the printer while you are cleaning.
    [eleven]

    • Y’all will use water to clean the printer, so this is especially important.
  2. 2

    Wipe the separator pad in the paper tray with a damp cloth.
    Accept the paper tray out of the printer. The separator pad volition be at the front border of the tray, at the eye. It is straight above the handle y’all employ to remove the tray.

    • For inkjet printers, the rollers might exist located underneath an admission panel. Open the panel nether the tray. You may have to remove a toner cartridge, equally well. A

      [12]
    • Make sure to use a soft cloth that is damp, not wet.
    • Practise non apply any cleaning fluid, equally this tin damage the printer parts.
  3. 3

    Employ the cloth to wipe the option-up rollers.
    The choice-up rollers are pocket-size, greyness rollers about

    12

    inch (one.iii cm) broad located within the printer on the front side, above the paper tray. There are two of them.
    [13]

    • Be sure to rotate the roller to make clean it on all sides.
  4. four

    Put the paper tray back in and print something to exam information technology.
    A clean option-upward roller volition help feed the paper correctly and print without streaks. Print a few pages to make sure the cleaning worked. Printing a blackness and white text certificate will exist sufficient to see if the rollers are clean.
    [14]

    • If the rollers are damaged, you may accept to take the printer to a repair store to replace them.

    Advertisement

Read:  Tinta Epson T664 Untuk Printer Apa Saja
  1. ane

    Turn off the printer and open information technology up.
    Make sure the printer is off before you begin. Open up the printer past looking for a lever underneath the print tray. The printer volition either elevator up or forwards to open.
    [15]

    • You tin can unplug the printer to make sure information technology is off.
  2. two

    Employ a material to gently wipe the impress heads if the printer opens on top.
    The print heads are the horizontal, metal pieces underneath the pinnacle of the printer. Wipe back and forth with a dry out cloth to remove whatever dry ink or lint.
    [16]

    • Wipe gently so that you don’t harm any parts.
  3. 3

    Pull the toner tray out if the printer opens in front.
    If the printer opens on one side, rather than on elevation, pull out the toner tray. The toner tray will have a handle that y’all tin can use to hands slide it out.
    [17]

    • If the printer opens on top, y’all don’t need to pull annihilation out.
  4. 4

    Take out the toner cartridges if the tray pulls out.
    If your printer is one of the models with a pull-out toner tray, take the cartridges out. The toner cartridges will lift out of the tray.
    [18]

    • The print head for this kind of printer model is underneath the cartridges.
  5. 5

    Slide the tab nether the toner cartridges back and along.
    If you are using a model with a toner tray that pulls out, at that place will be a tab underneath the toner cartridges on the drums. Sliding the tab back and forth effectually 12 times cleans the print head.
    [19]

    • The tab will be either blue or green.
  6. 6

    Rotate the drums nether the toner cartridges and wipe any ink.
    Look for a cog on one side of the drum. Use 1 finger to rotate the cog and wait for ink on the drums. Wipe whatsoever ink up with a dry cloth.
    [xx]

    • Use a dry, soft, clean fabric to wipe the drums.
  7. vii

    Put the toner cartridges dorsum and close the printer.
    If y’all took the toner cartridges out, put them back into the printer. If not, merely shut the printer.
    [21]

    • In one case everything is dorsum in place, you can turn the printer dorsum on.
  8. 8

    Run a calibration cycle, if necessary.
    On newer models, the printer volition recalibrate automatically. On older models, you lot may have to go into the menu and find a calibration bicycle. Information technology will accept a few minutes for the printer to recalibrate.
    [22]

    • The scale cycle is located in a unlike location on every printer. Expect for its exact location in your printer’s transmission.
    • Print a test page to make sure the printer is back to normal. Impress a page using color and black ink to make sure all of the cartridges are working as they should exist. A small-scale image taking up 1/iv of the page should be sufficient.

    Advertising

Read:  Cara Mengisi Tinta Hitam Printer Canon Mp287

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit





Ad

  • Impress at least once a week to keep the nozzles free of stale ink.

  • Utilize high quality ink cartridges.

Thanks for submitting a tip for review!

Advertisement


Things You’ll Need

  • Soft cloth or paper towel
  • Distilled water
  • Cling film
  • Syringe
  • Plastic tubing
  • Cleaning fluid (optional)

About This Article

Thanks to all authors for creating a page that has been read 47,832 times.

Is this article up to date?

Brother Printer Prints but Won T Scan

You May Also Like