Behringer U Phoria Umc202hd Driver Download Windows 10
In this commodity, we will walk you lot through how to get started with your Behringer USB sound interface on PC (Windows) and Mac (macOS). Setup is easy, so follow the sections below to get started.
-
Annals the Behringer USB interface
-
Download and install Behringer drivers
(Windows users only)
-
Ready and connect your gear
IMPORTANT:
You must register your interface within the first 90 days to receive the gratis extended three-year warranty. Learn more than on Behringer’s
support page
.
Before you start using your new interface, yous need to annals it on the Behringer website. This gives y’all a free license for the Tracktion software and extends your warranty. Follow the steps below to register the interface.
- Register your audio interface by inbound its series number on Behringer’sregistration page. The serial number is located on the back or lesser of your device.
- On the adjacent page, complete the requested information, upload your invoice, and clickSubmit.
- Afterwards registering your production, Behringer volition email you a redemption code to activate Tracktion.
- Check out our guide to learn
how to activate Tracktion.
Click the prototype to register your Behringer audio interface.
Download and install Behringer drivers (Windows users only)
After registration, the next stride is to download and install the required PC (Windows) driver. A driver isn’t necessary on a Mac OS because Behringer interfaces areclass-compliant and do not demand boosted software to connect. Follow the steps below to install the necessary driver software for Windows. If you lot’re a Mac user, skip this section and continue to
Gear up upward and connect your gear
.
- Visit Behringer’sAudio interface page and select your product.
- Click theDownloadstab and ringlet downwards toDrivers. Click the latest available commuter to start the download.
- Open yourDownloadsfolder,excerpt the .zip file, and run the .exe installer. Restart your estimator after the installation completes.
Although about Behringer audio interfaces have their own driver (version iv.38 as of July 2018), some of the smaller interfaces will require the third-party commuter, ASIO4All. These interfaces include the UMC22, UM2, UCA222, and UCA202. Check out our
ASIO4ALL setup guide
for instructions on how to install and configure it.
Ready and connect your gear
Once continued, the concluding step is to fix your gear and configure your calculator’southward audio settings. The process is effortless, so you’ll be making music in no time!
USB Connectedness TIP: We highly recommend connecting your interface straight to your computer, preferably a USB 2.0 port. USB hubs may not provide enough power to your interface, resulting in connectivity issues, and connecting to a USB iii.0 port may effect in connectivity issues.
- Turn the Volume knob all the mode down, then connect your speakers.
- If you’re going to utilize headphones, turn its volume knob all the way downwardly, besides.
- Connect the USB cable from the interface to your reckoner, then power information technology on.
- If you have the UMC404 or UMC1820, connect the ability supply and then connect the interface to your computer.
- Navigate to your figurer’due south sound settings and set information technology equally the default recording and playback device.
-
PC: Correct-click the
Speaker
icon on your Windows taskbar and clickSounds. SelectPlayback, correct-click your interface, and clickFix every bit Default Device and Set up as Default Communications Device. Lastly, select Properties, go to the
Advanced
tab, and uncheck the boxes under Exclusive Manner. Click the
Recording
tab and follow the same process. - Mac: Click theApple icon from the Carte Bar and selectSystem Preferences. Click Sound, and then select the Revolution under theInput andOutput tabs.
-
PC: Correct-click the
- If applicable, connect your headphones to the jack on the front.
- Play some music or a video, and slowly plough
MAIN OUT
and
PHONES
knobs upward until it’s at a comfy listening level. - Launch your DAW, go to its routing page, and then select the Behringer interface equally your principal input and output.
If you are running into connectivity bug, sample rate problems such as fast or boring playback, or sample rate mismatch errors, reconnect the interface, try a different port, and double-check your organisation and DAW sound settings. If the problem persists, try a different USB port or cablevision. Visit ourWindows andMac guides for more tips on resolving audio device connectivity.
v Tips for Better Mixes
Getting the Most from Your Habitation Studio Gear
How To – Starting time Recording
How To – Recording Vocals
How To Record – Tracktion 5
Record and Overdub in Logic
Related Manufactures
When yous need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and aid you become the well-nigh out of your gear. Our pro musicians and gear experts update content daily to proceed you informed and on your mode. Best of all, it’s totally Gratis, and it’s just another reason that you get more at Sweetwater.com.