Asus Router Admin Page Won’t Load After Firmware Update

Depending on your
router‘south configuration, yous might have to connect using a
LAN
port, and the client accessing the assistants interface usually needs to be in the same IP range.

For example, if you need to connect to http://192.168.1.1 in order to access the admin interface, your client PC needs to be in the range between 192.168.one.2 and 192.168.one.254.

Also, you will nigh likely need a recent browser version with Javascript support.

At that place are a number of other troubleshooting steps you tin take, here is a listing:

Make sure you lot’re using the right IP
address for the
router, every bit well every bit the correct port (some use 443, or 8080 instead of the standard port 80). For a list of routers and their default IPs/passwords check our
broadband hardware database.
You lot can also often find your
router‘s IP by but typing:
ipconfig
in command prompt, and looking at the “Default
Gateway” line.

Your client PC must exist on the
LAN
side of the
router
(continued to a
LAN
port). Y’all might want to endeavour configuring your PC with a static
IP address
in the
router‘south subnet (the
router‘southward
DHCP
server might not be working/configured properly nonetheless).

Use a
Cat5
cable to configure wireless routers
– the wireless settings may not be configured correctly and wireless access to the admin interface may be disabled.

Reboot the
router

– it is possible that the
router
is locked, the congenital-in web server has locked/crashed, and you lot can’t connect to information technology because of a temporary software issue that a simple reboot may be able to solve.

Reset the
router
to the manufactory defaults
–
NAT
routers usually have a reset push, that when pressed for x-30 seconds (while powering up/plugging in) resets the
router
to the manufactory defaults, so you lot can login with the default password, etc. Some may accept a pinhole reset button that requires a precipitous object like a newspaper pin to button. Just push in the push button, then plug-in the device and wait for 10-thirty seconds until the LED indicators bear witness some modify (they usually glimmer all together, in a different way than normal functioning), then you can let get of the reset button. Note the process might be different for your detail
router, check the user manual.

Try a dissimilar web browser
– some older routers don’t like particular web browsers because of buggy/dated code. Attempt Chrome, Cyberspace Explorer, etc.

Disable web proxies
– make sure Internet Explorer is non configured to employ some type of web
proxy
for browsing.

Update
firmware

– sometimes a corrupt
firmware
tin can render the
router
useless. Try updating to the newest one from the manufacturer’s website if you tin can get to the admin interface.

DHCP
?
–
NAT
routers usually human action every bit
DHCP
servers to serve multiple local IP addresses to internal
LAN
clients. If you lot prepare your network adapter to “Obtain an
IP accost
automatically” in the
TCP/IP
properties and your PC gets an
IP address
it is communicating with the
router. This can exist verified by dropping to command prompt, and typing:
ipconfig. If the
IP address
is in one of the individual ranges, usually 192.168.x.x, or 10.0.x.x, (but not 169.*.*.*), and then that indicates your customer is able to obtain an IP from your
router/DHCP server. You can also verify the
IP address
of your “Gateway” – that is the actual
router
IP y’all are connecting to.

PING the
router

– In Command prompt, try:
ping
192.168.0.i (substitute with the actual IP of your
router
from above stride). If it works, at least you know that you take some connectivity to it and the cablevision is skillful. If you are also able to
ping
an external IP, like 68.67.73.twenty, for example, information technology indicates you are online likewise.

Check cables and LEDs
are you getting the link LEDs on both ends of all cables? You might also endeavor unlike
Cat5
cables. The
router
has a number of LED indicators too, power, connectivity to the
WAN
port, etc. These tin be used as indicators of whether the
router
is connected to the cyberspace,
LAN, etc.

Telnet ?
– some routers have a serial port where you can connect straight (using a serial cablevision) and manage the
router‘s settings via telnet. Fifty-fifty though information technology’s a text-based interface, it does not rely on the network/IPs at all.

Note: If you are not sure of the default
IP accost, or username/password for your particular NAT router, you lot tin look it up in our hardware database of over
3500+ routers.