Ada Garis Hitam Di Printer Hp 1210

Ada Garis Hitam Di Printer Hp 1210



Ada Garis Hitam Di Printer Hp 1210


HP Ink Tank 310, 410 Printers – Black Ink Not Press and Other Impress Quality Problems

This document is for HP Ink Tank 310, 311, 315, 316, 318, 319, Wireless 410, 411, 412, 415, 416, 418, and 419 printers.

The quality of a printed document or photograph is not as expected. The procedures in this document should help with streaked or faded printouts, color or black ink not printing, documents with blurred or fuzzy text, ink streaks or smears, and other print quality bug.


While performing the following steps, avoid lifting the printhead latch.

Step ane: Use genuine HP printheads and ink

HP recommends that you use genuine HP ink. HP cannot guarantee the quality or reliability of not-HP ink. If y’all exercise not use genuine HP ink and HP printheads, the steps in this document might not resolve print quality issues.

Buy replacement ink and other supplies from the
HP Shop
or local retailers.


Using non-HP ink contaminates any 18-carat HP ink added afterwards. Considering ink remains in the printhead when the ink is changed, the contaminated ink can remain in the system and affect print quality.

If you lot are using 18-carat HP printheads and ink, go along to the next step.

Stride 2: Check the ink levels

Depression ink levels can touch print quality.


Damage to the printer as a result of improperly filling the ink tanks or using non-HP ink is not covered under warranty.

Do not let the ink levels fall below the minimum make full line when printing. Very low ink levels can event in reduced print quality or damage to the ink system.

  1. Visually cheque the printer ink levels using the ink tank window.

  2. Add ink to whatever of the tanks where the level is below or close to the minimum fill up line.


    Do not permit the ink levels fall below the minimum fill line when printing. Very depression ink levels can result in reduced impress quality.

      Image: Filled ink tanks

    1. Maximum make full line

    2. Minimum fill up line

Footstep iii: Make sure you are using the advisable paper for your print job

Apply the following guidelines to make sure the paper you are using is advisable for the print chore. If information technology is not, reload the printer with an appropriate paper blazon.

  • Load the paper impress side downwards in the input tray.
    Many papers have printing and nonprinting sides, such every bit photo paper and envelopes. Normally, the smoother side is the “print side,” and sometimes the non-print side has a logo of the paper manufacturer on it.

  • Practice not use wrinkled or curled paper.
    Employ only clean, wrinkle-free newspaper.

    Do not use wrinkled paper

  • Use the right paper blazon for your project.

    • For everyday text documents, plain newspaper with ColorLok technology works well. Paper with ColorLok technology is industry-standard paper that works well with HP ink.

      ColorLok logo

    • For documents with dumbo printing, such as high dissimilarity graphics or photos, employ HP Advanced Photo Paper for best results.

    • Some paper might not absorb ink also as others. If your prints smear easily, make certain you are using a recommended paper.

  • Shop photo newspaper in its original packaging inside a resealable plastic handbag.
    Store the newspaper on a flat surface in a cool, dry identify. Load 10-20 sheets of photograph paper only when yous are ready to print, and then put the unused newspaper dorsum in the packaging.

  • Try using a different paper.
    This determines if the problem is related to the newspaper.

Later on checking the paper, try to print again. If the print quality is unacceptable, continue to the adjacent footstep.

Stride 4: Cheque the print settings

Cheque the print settings to make sure they are appropriate for your print job.


Impress settings vary by operating system and software application.

Later checking the print settings, try to print over again. If the impress quality is unacceptable, continue to the next step.

Attempt to print again. If the print quality is unacceptable, continue to the next pace.

Step 5: Check for ink smears on the back of printouts

If there are smears of ink on the back of your printouts, y’all tin can employ an automatic tool to resolve the issue.

  1. Load paper into the input tray.

  2. Press and hold the Power button, press the
    push button


    times, printing the
    Commencement Copy Color


    times, and so release the Power button.

    The printer feeds one page slowly. The printer might brand some dissonance for approximately ane infinitesimal.

  3. Wait until the page ejects from the printer before you lot remove it.

  4. Examine the test page.

    If the print quality is unacceptable, proceed to the next step.

Step 7: Run the printhead cleaning utility using the HP Software

HP provides an automated printhead cleaning utility that can unclog printhead nozzles.


Clean the printheads just when necessary. Unnecessary cleaning shortens the life of the printheads and wastes ink.

To protect the printheads from drying out, always turn the printer off with the Power button.

If the print quality is unacceptable, go on to the next step.

Stride viii: Align the printheads using the HP software

Use the HP printer software to align the printheads.

Endeavour to print again. If the print quality is unacceptable, continue to the next footstep.

Stride 9: Replace the printheads

If you have followed all the steps in this document and your printer is producing printouts with print quality issues, you must replace both printheads.

Contact HP to supersede both printheads. If you lot already have new replacement printheads available, go to
Replacing Printheads
for more information.

Contacting HP for service in Asia Pacific

If y’all completed all the preceding steps and your printer withal has an issue, you lot might need further assistance from HP. Go to
Contact HP Support
to review available service options.

Contacting HP for service in all countries/regions, except Asia Pacific

If you completed all the preceding steps and your printer still has an issue, service the production.Check your production warranty
to make up one’s mind if your product is still nether warranty, and then go to
Contact HP Support
to schedule a repair or replacement.

Repair fees might utilise for out-of-warranty products.

Ada Garis Hitam Di Printer Hp 1210

Read:  Cara Install Printer Hp 1515 Tanpa Cd

Check Also

Ampun Reset Kedap Kedip Pada Printer Epson L350

Ampun Reset Kedap Kedip Pada Printer Epson L350

Ampun Reset Kedap Kedip Pada Printer Epson L350 Seperti yang kita ketahui, penggunaan printer tentunya …